2. Tighten the long screws and nuts onto the snap fasteners.
3. Four clips are fixed at the threaded hole positions on both sides.
4. Tighten the long screws to secure the equipment in place.
Desktop Mounting![]() |
Cantilever Mounting![]() |
| No. | Item | QTY |
|---|---|---|
| 1 | Industrial Panel PC | 1 unit |
| 2 | Power Adapter | 1 unit |
| 3 | 3-pin 5.08 Power Terminal Plug (optional) | 1 unit |
| 4 | Embedded Snap-In Kit (optional) | 1 set |
| 5 | Wall-Mount Bracket (Optional) | 1 unit |
| 6 | Certificate of Conformity | 1 sheet |
| 7 | Warranty Card | 1 sheet |
| 8 | User Manual | 1 copy |
| No. | Name | Description |
|---|---|---|
| 1 | Ethernet Port | Default single port; optional dual or quad ports |
| 2 | Serial Port | Default 2 × RS232; optional 6 × RS232/RS485 |
| 3 | USB | Default 4 × USB (2 × USB 2.0, 2 × USB 3.0); optional 8 × USB |
| 4 | GPIO | Optional 4 input / 4 output |