Copper wire and cable scrapper with motor suitable for many kinds of big square cable jacket stripping

Model 003

1,52CM

The operation and structure of the stripping machine are simple, so that the operation and structure of the stripping machine are simple.
It is also convenient to use, process cable single wire copper wire can be rolled (pressed) or broken with a blade, other

2,53CM

The cable must break the insulation with a blade and then remove the copper wire.

Model 004

1,52CM

The function characteristic of this machine is the double channel extrusion function, and the single line is machined.
Copper wire, multiple strands, scattered wires, etc., for

2,54CM

Extrusion mode of blade peeling insulation layer

After coming out, the wire core and outer skin can be separated automatically.

The function characteristics of this machine has all the functions of model 004.

Add five dollars to the front. Mainly for winter days.

Model 005

1,52CM

Air cooling, it is difficult to disassemble plastic after hard, such as double knife (straight belt) stripping machine before and after use.

2,55CM

The breakthrough of reduced human workload, high output and great breakthrough is that the tape delivery operation, which has always been used in the past, has improved the direct belt operation.

1.Introduction of wire stripping machine:

(1).The HT-918-A type Electric Wire Stripping Machine is suitable for all kinds of wire, single wire and inner package aluminum wire. The size can be calculated by the way of entering the hole. The product is simple (one set of rollers), the price is cheap, the practicability is strong, and the wire can be stripped (2 ~ 25mm).

(2)The HT-918-KOB type Electric Wire Stripping Machine is the one with the most function, most comprehensive, best performance, it increased five knife frame based on KO type machine, three twin Socket line hole, which makes it more suitable for all kinds of wire segments, so that a variety of rubber cables are easily stripped, in addition it can time off the single or dual core flat line. It is (stripping diameter range is 1 - 42mm) so that the wire stripping function is greatly strengthened, so that each line hole functions more segments.

Feature:

HT-918KOB type makes the rubber cable stripped easily. Moreover, it can strip single-core,double-core flat wires at one time.

Model: EZT-SM70MAX2

Power: AC220 / 50HZ

Motor power: rated 1000W

Display: Chinese and English LCD display

Cutting length: 1mm ~ 10000mm

Stripping length: thread 0-150, the tail 0-150mm

Cutting tolerance: (0.002xL) mm or less

Middle stripping: twelve

Cut the core cross-section: 2-70mm ²

Catheter maximum diameter: ¢ 18mm

Suitable stripping wire: PVC, Teflon, glass wire

Blade material: hard tungsten steel

Stripping speed: 4000-6000 / hour

Drive mode: eight-wheel drive