Soft Tube Cutting Machine For Plastic Rubber Silicone Tube Cutter

Application

The cutting machine is suitable for cutting tube, ribbon/webbing/belt, cable/wire, sheet, film etc.

Tube: PVC tube, heat shrink tube, braided tube, fiberglass tube, Teflon tube, corrugated tube, mesh tube, sponge tube, silicone hose, etc.

Cable: Flat cable, copper wire, nylon rope, ribbon cable, etc.

Tape: ribbon, belt, webbing, label, rubber band, nickel strap, cotton tape, elastic band, plastic tape, zipper, conductive tape, foam, double-sided tape, etc.

Sheet: foam sheet, Nickel sheet, diffuser sheet, plastic/rubber sheet, pvc sheet, etc.

Film: plastic film, reflecting film, insulation paper, PE, Copper/Aluminum foil, release paper, etc.

one machine suitable for cutting various kinds of materials

Features

1. High speed: It can cut 100~120 cut per minute. (50mm long)

2. Accuracy: Cut-length is accurate, cut length can be set between 0.1-9999.9mm.

3. Cutting type: For cold cut and Optional hot cut. Hot cut suitable for materials that needs hot sealing, such as Nylon webbing, polyester webbing, etc.

4. Automatic operation: It works automatically only by setting length and quantity. Save labor, high efficiency.

5. Automatic stopper: It stops automatically if materials run out during operation

6. Memory: Set-length, set-QTY & set-speed are not erased even if power off & on

7. Application:The cutting machine is suitable for cutting tubes, cable, webbing/ribbon/belt, small wire, sheet and film, etc.

8. High speed, high accuracy, designed for cutting non-adhesive materials.

Features Of Tube Automatic Cutting Machine

1. Excellent price to performance ratio

2. Versatile machine can be used to process a wide range of materials

3. Easy, menu guided operation and programming requires minimal training

4. Due to the heavy duty, precision cutting unit, even very thin materials can be cut clean and square