M0701 Series: This motor is designed for the two‑wheel drive chassis of industrial robot vacuums, serving as the drive wheel motor.
Ultra-low noise, high precision, and zero backlash ensure quiet and accurate operation. The direct-drive system delivers fast response with zero latency. Long service life is achieved thanks to high-quality bearings, while the compact structure allows for a large hollow shaft design. The simple, highly integrated design uses relatively few components, eliminates mechanical friction in the transmission, and achieves a transmission efficiency close to 100%.


| Parameter | Unit | Value |
| Overall Dimension | mm | Φ75.25×42 |
| Rated Voltage | VDC | 24 |
| Rated Power | W | 25 |
| Rated Torque | N·m | 1.2 |
| Stall Torque | N·m | 4.5 |
| Rated Speed | rpm | 200 |
| No-load Speed | rpm | 300 |
| Rated Current | A | 1.55 |
| Stall Current | A | 8.5 |
| Module Mass | g | 730 |
| Noise Level | dB | ≤40 |
| Encoder Resolution | bit | 12 |
| Communication Protocol | — | RS485 |
| IP Rating | — | IP54 |
| Insulation Class | — | B |
| Withstand Voltage | VAC/Hz | 600/50 |
| Operating Temp. | ℃ | -20~105 |
| Operating Humidity | % | <85 |
| Storage Temp. | ℃ | -20~65 |
| Storage Humidity | % | <85 |
