MachineU > China Products > Machinery
-Made Electric Heat Treatment Furnace Hwf160-10nh Vacuum Furnace with Effective Chamber Dimensions 500*500*650mm
-Made Electric Heat Treatment Furnace Hwf160-10nh Vacuum Furnace with Effective Chamber Dimensions 500*500*650mm
Specifications
Model NO. :
HWF160-10NH
Type :
Electric Holding Furnace
Specification :
1650*1950*2000mm(W*H*D)
Supply Ability :
50 Sets/Year
  :
Support payments in USD
Refund policy :
Claim a refund if your order doesn't ship, is missing, or arrives with product issues.
Description

​​Primary Applications​​

This industrial furnace is specifically engineered for metal component soldering and HTCC package processing, while also supporting additional thermal treatments including decarburization, annealing, quenching, scorching, hardening, and thermal decomposition operations.


2. Technical Specification:

  1. Rated Temp: 900ºC
  2. Max Temp: 1100ºC
  3. Atmosphere: N2, H2, with humidification
  4. Oxygen Content: Measured by O2 content analyzer
  5. Muffle Material: SUS 310S
  6. Muffle Dimensions: φ750mm×900mm(d×D)

-Made Electric Heat Treatment Furnace Hwf160-10nh Vacuum Furnace with Effective Chamber Dimensions 500*500*650mm

  1. Effective Chamber Dimensions: 500×500×650mm(W×H×D)
  2. Loading Method: Manual, through horizontal guideway shelves
  3. Heating Method: Resistance wire pre-built heating plate
  4. Cooling Method: Air cooling with blower
  5. Temp. Control Stability: ± 1ºC(controller with P.I.D function)
  6. Profile Steps: Default 20 steps
  7. Temp. Uniformity: ± 5ºC
  8. Thermcouple: Type K
  9. Temp Control: 3 Points
  10. Temp. Measurement: 1 Point
  11. Max. Heating Power: 40kW
  12. Typical Insulation Power: ≤ 25kW
  13. Heating Speed: ≤ 5ºC/min
  14. Furnace Surface Temperature: ≤ 40ºC
  15. Max Vacuum Value: ≤ 10Pa
  16. Exhaust System: 1 exhaust port on the top with H2 igniter
  17. Alarm System: audible and visual alarm in case of over temp, thermcouple broken, low air pressure, low water pressure, substandard vacuum level, etc
  18. Weight: 1500kg
  19. Appearance Colour: Light Grey
  20. External Dimensions: 1650mm×1950mm×2000mm (W×H×D)

4. Facility Requirements
  1. Environmental Conditions: temp.: 0~40ºC, humidity ≤ 80%RH, no corrosive gas, no strong airflow disturbance
  2. N2 Conditions: 99.999% purity, working pressure: 0.2-0.4MPa, Max gas consumption 2-6 m3/h
  3. H2 Conditions: working pressure: 0.2-0.4MPa, Max gas consumption 1-3m3/h
  4. Compressed Air Condition: dry, clean, oil-free, working pressure: 0.4-0.8MPa
  5. Water Conditions: clean, no corrosive water, working pressure 0.1-0.3MPa, 3-9L/min
  6. Ventilation System: non-contact access to the user pumping system, pumping capacity is greater than 15m3/h
  7. Ground Requirements: horizontal, no obvious vibration, load-bearing> 500 kg/m2;
  8. Power Condition(TBD): capacity > 55kVA, 3-phases 5-lines, voltage 220/380V, frequency 50Hz. Fire line: yellow, green, red, Zero line: blue, Ground line: yellow-green;
  9. Installation Site: 3000mm×2500mm×3000mm(D×W×H), with an installation area greater than 7.5m2.

Hefei Chitherm Equipment Co., Ltd. is an advanced equipment supplier specializing in the research and development, design, manufacturing, sales, maintenance, and service of high-, medium-, and low-temperature industrial furnaces and laboratory furnaces. Its product range encompasses bell furnaces, box furnaces, hot air furnaces, vacuum furnaces, tube furnaces, mesh belt furnaces, bogie hearth furnaces, rotary furnaces, roller hearth furnaces, and pusher furnaces, which are extensively applied in fields such as advanced ceramics, electronic components, thick-film circuits, additive manufacturing, powder metallurgy, new energy, and photovoltaics. These furnaces are suitable for thermal treatment processes of materials including ITO targets, MLCC/HTCC/LTCC, ceramic filters, magnetic materials, CIM/MIM, and lithium battery cathodes and anodes, as well as various other new material processes such as pre-sintering, dewaxing, degreasing, sintering, drying, heat treatment, curing, and ceramization.


Send your message to this supplier
Send Now

-Made Electric Heat Treatment Furnace Hwf160-10nh Vacuum Furnace with Effective Chamber Dimensions 500*500*650mm

Ask Latest Price
Product Detail
Model NO. :
HWF160-10NH
Type :
Electric Holding Furnace
Specification :
1650*1950*2000mm(W*H*D)
Supply Ability :
50 Sets/Year
  :
Support payments in USD
Refund policy :
Claim a refund if your order doesn't ship, is missing, or arrives with product issues.
Contact Supplier
-Made Electric Heat Treatment Furnace Hwf160-10nh Vacuum Furnace with Effective Chamber Dimensions 500*500*650mm

Hefei Chitherm Equipment Co., Ltd

Verified Supplier
1 Years
anhui, hefei
Business Type :
Manufacturer
Main Products :
High Temperature Box Furnace, Elevator Furnace, Hot Air Drying Oven
Total Annual :
2480238-2756380
Employee Number :
50~100
Certification Level :
Verified Supplier
Discover similar products
View More

Find Similar Products By Category:

Supplier Homepage Products Vacuum Muffle Furnace
MachineU China Products Machinery
Contact Supplier
Submit Requirement