I. Equipment Composition
The equipment consists of the following main components:

•Outer frame

•Heating furnace

•Vacuum chamber

•Sealing door

•Vacuum system

•Atmosphere system

•Control system

•Common Temperature: 1000°C

•Maximum Temperature: 1100°C

•Temperature Stability: ±1°C, with PID parameter self-tuning function

•Temperature Uniformity: ±5°C (at 1000°C platform, constant temperature for 1 hour, empty furnace test, with reserved inspection port)

•Maximum Heating Rate: 10°C/min

•Temperature Control Points: 3 points; Temperature Control Thermocouple: N-type

•Additional Independent Temperature Measurement Points: 1 point; with reserved temperature measurement holes for customer's own temperature measurement

Tank and Structural Parameters
•Tank Material: Inconel 601

•Tank Dimensions: Φ630×900 (diameter × depth, unit: mm)

•Effective Uniform Temperature Zone Dimensions: 400×400×500mm (width × height × depth)

•Material Support Method: Bottom support plate inside the tank, load capacity ≥40kg, with 2 workbenches

Heating System
•Heating Elements: FEC ceramic fiber heaters, arranged outside the furnace chamber, lifespan ≥10,000 hours

•Maximum Heating Power: 48kW

•Typical Empty Furnace Insulation Power: ≤20kW

Control and Program Functions
•Program Steps: 30 steps

Atmosphere and Vacuum Parameters
•Sintering Atmosphere: Argon or air

•Oxygen Content: Better than 10ppm + oxygen content of gas source

•Oxygen Monitoring: Equipped with a micro-oxygen analyzer to monitor oxygen content in the furnace in real-time (not available in air state)

•Ultimate Vacuum Degree: ≤100Pa, evacuation time ≤10 minutes

Cooling System
•Cooling Method: External forced cooling with blower

•Cooling Rate: When below 500°C, cooling rate ≥2°C/min

Safety Protection and Alarms
•Alarm Protection Functions: Including overtemperature, thermocouple break, low air pressure, low water pressure, vacuum degree not meeting standards, etc., with audible and visual alarms

•Protection Function: Overtemperature heating cutoff protection function

Basic Equipment Information
•Equipment Weight: Approximately 1000 kg

•Equipment Color: Light gray

•Reference External Dimensions: 1500×1900×1800 mm (width × height × depth), specific dimensions subject to actual product