PV7-1X/06-10RG01MA0-10
PV7-2X/20-25RE01MA3-10
PV7-1X/06-10RG01MA3-10 German PV7 series Rexroth hydraulic oil pump in stock hydraulic pump
| Parameter | Specification |
| Model Series | PV7-1X/10-14RE01MC0-16, PV7-1X/16-20RE01MC0-16, PV7-2X/20-25RE01MC0-16 (typical models) |
| Displacement per Revolution | 10–25 cm³/rev (varies by specific model) |
| Maximum Operating Pressure | 210 bar (continuous), 250 bar (peak) |
| Maximum Speed | 1800–3600 rpm (depends on displacement and fluid viscosity) |
| Minimum Speed | 600 rpm (ensures stable operation) |
| Fluid Medium | Mineral oil-based hydraulic fluid (ISO VG 32/46/68 recommended) |
| Fluid Temperature Range | -20 °C to +80 °C (operation); -40 °C to +90 °C (storage) |
| Viscosity Range | 10–1000 mm²/s (operation); 2–1500 mm²/s (start-up) |

| PV7-1X/06-14RA01MA0-07-P65 |
| PV7-1X/06-14RA01MA0-07-P70 |
| PV7-2X/20-20RA01MA0-10-P65 |
| PV7-2X/20-20RA01MA0-05-P25 |
| PV7-2X/20-20RA01MA0-05-P50 |
| PV7-1X/06-14RA01MA0-10-A473 |
| PV7-1X/06-10RA01MA0-10-P100 |
| PV7-1X/06-14RA01MA0-10-A492 |
| PV7-2X/20-20RA01MA0-10-C3.1 |
| PV7-2X/20-20RA01MA0-05-A480 |
| PV7-2X/20-20RA01MA0-10-A480 |
| PV7-1X/06-10RA01MA0-10-C3.1 |
| PV7-2X/20-20RA01MA0-10-P100 |
| PV7-2X/20-25RA01MA0-05-P24Q30 |
| PV7-1X/06-10RA01MA0-05-P35Q11 |
| PV7-2X/20-25RA01MA0-05-P30Q25 |
| PV7-1X/06-10RA01MA0-05-P40Q11 |
| PV7-2X/20-25RA01MA0-05-P30Q36 |
| PV7-1X/06-10RA01MA0-05-P50Q15 |
| PV7-2X/20-25RA01MA0-05-P45Q35 |
| PV7-1X/06-10RA01MA0-10-P55Q12 |
| PV7-2X/20-25RA01MA0-05-P45Q36 |
| PV7-1X/06-10RA01MA0-10-P65Q12 |
| PV7-2X/20-25RA01MA0-10-P63Q35 |
| PV7-1X/06-10RA01MA0-10-P70Q12 |
| PV7-1X/06-10RA01MA0-05-P15Q08 |
| PV7-1X/06-14RA01MA0-07-P70Q18 |
| PV7-1X/06-10RA01MA0-05-P25Q09 |
| PV7-1X/06-14RA01MA0-04-P30Q19 |
| PV7-1X/06-10RA01MA0-05-P25Q11 |
| PV7-1X/06-10RA01MA0-10-P100Q10 |
| PV7-1X/06-10RA01MA0-05-P35Q09 |
| PV7-1X/63-71RE07MC3-16 |
| PV7-1X/100-118RE07MD3-16 |
| PV7-1X/63-71RE07MW0-16WG |
| PV7-1X/10-20RE01MD5-10 |
| PV7-1X/25-30RE01MW0-16WG |
| PV7-1X/40-45RE37MW5-16WG |
| PV7-1X/100-118RE07MC5-16WG |
| PV7-1X/63-94RE07MC7-08WG |
| PV7-1X/40-45RE37MW6-16WH |
| PV7-1X/100-118RE07MD6-16 |
| PV7-1X/40-45RE37MC5-16WG |
| PV7-1X/100-118RE07MC0-16 |
| PV7-1X/63-71RE07MD0-16 |
| PV7-1X/40-45RE37MC0-16-P90 |
| PV7-1X/25-30RE01MC0-16-P100Q38 |
| PV7-1X/100-150RE07MC0-08-A464 |
| PV7-1X/100-118RE07MD0-16 |
| PV7-1X/10-14RE01MN0-16 |
| PV7-1X/40-45RE37MC5-16 |
| PV7-1X/100-118RE07MC5-16 |
| PV7-1X/25-30RE01KC3-16 |
| PV7-1X/10-20RE01MC5-10WG |
| PV7-1X/25-30RE01MW0-16 |
| PV7-1X/16-20RE01MD3-16 |
| PV7-1X/16-20RE01MC0-16-P110 |
| PV7-1X/40-45RE37KD0-16-C3.1 |
| PV7-1X/63-71RE07MC5-16WH |
| PV7-1X/16-30RE01KC0-08 |
| PV7-1X/10-14RE01MD5-16 |
| PV7-1X/63-71RE07MC6-16 |
| PV7-1X/16-20RE01KD0-16 |
| PV7-1X/10-14RE01MW0-16 |
| PV7-1X/63-71RE07MC0-16-C3.1 |
| PV7-1X/16-30RE01MW0-08WH |
| PV7-1X/100-150RE07MC0-08-A446 |
| PV7-1X/25-30RE01MC5-16WG |
| PV7-1X/10-20RE01MC0-10-A497 |
| PV7-1X/100-150RE07KC0-08 |
| PV7-1X/100-150RE07MD5-08 |
| PV7-1X/25-45RE01MC0-08-P25Q50 |
| PV7-1X/40-71RE37MC5-08 |
| PV7-1X/10-14RE01KD0-16 |
| PV7-1X/16-20RE01MC0-16-P120 |
| PV7-1X/100-150RE07MW0-08WH |
| PV7-1X/16-20RE01MC5-16WG |
| PV7-1X/10-20RE01MW0-10WH |
| PV7-1X/63-94RE07KD0-08 |
| PV7-1X/63-71RE07MW0-16WH |
| PV7-1X/63-71RE07MC7-16WH |
| PV7-1X/40-45RE37MC0-16 |
| PV7-1X/63-94RE07MC0-08-P80Q114 |
| PV7-1X/40-45RE37MC5-16WH |
| PV7-1X/10-14RE01KN0-16 |
| PV7-1X/25-30RE01MC5-16WH |
| PV7-1X/63-71RE07KC0-16 |
| PV7-1X/10-20RE01MC3-10 |
| PV7-1X/16-20RE01MN0-16 |
| PV7-1X/25-45RE01MW0-08WH |
| PV7-1X/63-71RE07MN0-16 |
| PV7-1X/63-71RE07KD0-16 |
| PV7-1X/16-20RE01MC8-16 |
| PV7-1X/40-71RE37MW0-08WH |
| PV7-1X/40-45RE37MD0-16-P50Q36 |
FAQ:
1. Should the PV7 pump be pre-filled with oil before commissioning?
Yes, fill the housing through the drain port to prevent dry running and component wear.
2. How to bleed the PV7 pump system?
Loosen the vent screw, manually rotate the coupling or jog the motor, and stop when bubble-free oil flows out.
3. What is the recommended no-load running time for PV7 pumps?
5-10 minutes to check vibration, leakage, and temperature rise.
4. How to adjust the pressure of a direct-acting PV7 pump?
• Clockwise rotation of the adjusting screw: Increase pressure;
• Counterclockwise rotation: Decrease pressure.
5. How to adjust the flow rate of the PV7 pump?
• Clockwise rotation of the flow adjusting screw: Decrease flow;
• Counterclockwise rotation: Increase flow.