Ice Cream Blending Tank Mixing Tank Cooling Tank Productiion Line
1. Ice Cream Tanks Technical Parameter :
Model | 30 | 100 | 300 | 500 | 1000 | 2000 | 3000 | 5000 | 1500~5000 |
Maximum capacity(L) | 30 | 100 | 300 | 500 | 1000 | 2000 | 3000 | 5000 | 1500~5000 |
Main Axle Rotating Speed(rpm) | 22.5 | 22.5 | 20 | 22.5 | 22.5 | 22.5 | 22.5 | 24 | 22.5 |
Main motor power(kw) | 0.37 | 0.75 | 0.75 | 1.1 | 1.5 | 2.2 | 3 | 5 | 1.5~5 |
Electrical heating power(kw) | 1 | 2.5 | 5 | 5 | 7.5 | 6 | 8 | 15 | 7.5~15 |
Heat holding power(kw) | 1 | 2.5 | 2.5 | 2.5 | 2.5 | 2.5 | 2.5 | 5 | 2.5~5 |
Weight(kg) | 60 | 200 | 290 | 515 | 785 | 1500 | 2100 | 3000 | 1010~3000 |
Outside dimensions(mm) | φ500 ×600 | φ750 ×700 | φ850 ×1060 | φ1035 ×1480 | φ1250 ×1700 | φ1480 ×1840 | φ1900 ×2071 | φ2411 ×2600 | φ1400×1800~φ2000×2500 |
2. Introduction :
1, Can make ingredients tank, mixing tank, mixing tank, fermentation tank, disinfection cylinder, aging tank, etc.
2, Apply to food, dairy, juice beverage, medicine, chemical and biological engineering, etc.
3, As the heating, cooling, heat preservation, sterilization or slurry must be of stainless steel storage tank,
especially suitable for the pasteurized milk and heat preservation, is a necessary equipment in ice cream production line.
Classification:
1. According to the open forms can be divided into: open type cold hot cylinder,enclosed cold hot cylinder
2. According to the structure can be divided into: Ordinary cold hot cylinder,up and down conical cold hot cylinder ,upper and lower head cold hot cylinder
3. According to the heating mode can be divided into: steam heating cold hot cylinder,electric heating heat and cold cylinder, gas heat and cold cylinder
Structure features:
From the Inner tank, jacket, insulation layer, the outer foreskin, reducer, stirring paddle, thermometers and other components
Inner tank:stainless steel plate 304 material, surface polishing.
Retarder:cycloid reducer fixed on the beams of the bracket, gear wheel shaft and impeller connection, use of loop connection for easy disassembly and cleaning.
Thermometer: specification of 00C~1000C, the installation beam, straight minimum medium position, the fluid material used in the lowest position also can indicate the temperature, to achieve sterilization and aging objective.