CNG Tank 351~450hp Horsepower 8x4 Heavy Duty Dump/Tipper Truck For Sale Construction Dump Truck
| Engine | |
| Make | WP12NG380E40 |
| Type | Six-cylinder,in line, water cool,turbocharged intercooling |
| Rated power | 280kw |
| Rated speed | 2200rpm |
| Max. Torque | 1500N.m/1400-1600rpm |
| Main Technical Specification | |
| Curb Weight | 16000kg |
| Payload capacity | 30000kg |
| Axle loading capacity(F/R) | 2×7500/2×16000kg |
| Max. traveling speed | 80km/h |
| Grade ability | 30% |
| Approach angle | 25° |
| Departure angle | 24° |
| Fuel consumption | 35L/100km |
| Fuel tank capacity | 320L |
| CNG tank capacity | 4×200L behind the cabin/4×80L beside the chassis |
| Dimensions | |
| Overall size(L×W×H) | 10500× 2500×3450mm |
| Wheel base | 1940+3860+1450mm |
| Tread | 2065/1860/1860/1860mm |
| Min. ground clearance | 255mm |
| Transmission System | |
| ZF16S1950 with synchronizer 16 forward & 2 reverse | |
| Ratio | |
| Forward | 15.387,13.054,10.574,8.999,6.957, 5.920,4.583,3.900,3.357,2.875,2.307, 1.963,1.518,1.292,1.000,0.851 |
| Reverse | 12.440,10.587 |
| Dump Body | |
| Overall length | 6500mm |
| Overall width | 2300mm |
| Overall height | 1300mm |
| Side plate thickness | 6mm |
| Under floor thickness | 8mm |
| Hoist | HVYA front lifting |
| Steering System | |
| Hydraulic steering with power assistance | |
| Driving position | Left hand drive |
| Axle And Tyre | |
| Front axle | Stub axle with double T-cross sectio Capacity: 7500kg |
| Rear axle | Hub reduction and final drive Capacity: 16000kg |
| Rear axle ratio | 5.263 |
| Tyre size | 12R22.5 |
| Electric System | |
| Batteries | 2*12 Volt – 150 AH*2 |
| Alternator | 24 Volt/70A |
| Starter | 24 Volt/7.80kw |
| Clutch And Brake | |
| Single-plate dry coil-spring clutch, hydraulically operated with air assistance | |
| Service brake | Dual circuit compressed air brake |
| Parking brake | Spring energy operating on rear wheels |
| Auxiliary brake | Engine exhaust brake |
| Suspension | |
| Front suspension | 9 semi-elliptic leaf spring |
| Rear suspension | 12 semi-elliptic leaf spring |
