An RJ45 Ethernet connector with pre-molded cable is a factory-assembled, ready-to-deploy networking solution that combines a standard 8P8C modular plug (RJ45) with a permanently attached and sealed Ethernet cable. Designed for reliability and quick installation, it eliminates field termination work.
Thread type | RJ45 |
Contact nut material | Brass, nickle-plated |
Contact surface material | Brass, gold-plated |
Contact carrier material | PA, black |
Housing material | TPU, black |
Seal material | FPM/FKM |
Insulation resistance | ≥100MΩ |
Contact resistance | ≤5mΩ |
Pollution degree | 3 |
Ambient temperature | -25~+85℃ |
Mating cycles | >100 |
Degree of protection | IP20 |
Pin assignment | Wire color | PIN | Rated current | Voltage | Wire gauge | Cable outlet | Length | Model No. |
![]() | 1 = WH/OR 4 = BU 5 = WH/BU 7 = WH/BN 8 = BN | 8 | 1.5A | 48V | 4×2×0.16,shielded (4×2×26AWG) Blueish green, PVC, OD=6.6 | Straight | 2M | RJ45S-2/E60K |
The KRONZ RJ45 Connector can be used in a wide range of scenarios and occasions. These connectors are commonly used to connect Ethernet cables in networking applications. They are also ideal for use in telecommunications applications, including telephone systems and data networks. In addition, the RJ45 Connector is suitable for use in industrial automation and control systems, where reliable connectivity is essential.
The KRONZ RJ45 Connector is available in a range of different configurations, including RJ45 Female Connector, RJ45 Male Connector, and RJ45 Female to Female Connector. This makes it easy to find the right configuration for your specific application needs. The connector is also available with different pin configurations, including 4 and 8 pins, to ensure compatibility with a wide range of devices.