Low Cost Windproof Rolling Shutter Door Forming Machine
The windproof rolling shutter door produced by the Low cost windproof rolling shutter door forming machine is a kind of high strength and high rigidity rolling shutter door. It uses galvanized steel sheet as material.
The thickness of the windproof rolling shutter door material produced by the Low cost windproof rolling shutter door forming machine is usually determined according to the opening area of the door.
The wind-proof rolling shutter door produced by the Low cost windproof rolling shutter door forming machine has the following four characteristics:
Features of windproof rolling shutter doors produced by Low cost windproof rolling shutter door forming machine:
1. The door is wide, the arc is large, and the wind resistance is strong. The thickness of the door is 0.7-1.2mm. It is very durable and can replace ordinary doors.
Features of windproof rolling shutter door produced by Low cost windproof rolling shutter door forming machine:
2. Long service life, wind resistance; wear resistance and corrosion resistance;
Features of windproof rolling shutter door produced by Low cost windproof rolling shutter door forming machine:
3. Unique earless connection, convenient positioning;
Features of windproof rolling shutter door produced by Low cost windproof rolling shutter door forming machine:
4. Opening and closing are always smooth, without tilting and blocking.
Technical parameters of Low Cost Windproof Rolling Shutter Door Forming Machine
The total length of the equipment | 8700mm, the width is 1300mm the height is 1200mm |
Motor | power 4Kw+4Kw working voltage 380V Or As Customize |
Production speed | 8m/min |
kind of drive | 1 inch chain drive |
Weight s | 2.5 tons |
Machine forming shaft | The machine has18 rows of forming shafts, big frame: 350H section steel, 14mm vertical plate.Diameter 70 solid axis |
Wheel material | 45# steel hard chrome plating |
Numerical control system | PLC panel, kel-320 display |
Counter | adopts domestic photoelectric rotary encoder, a40s6-600-2-12-acp |
The molding part | precision wheel rotation forming, forming effect is good, reduce friction between wheels and raw materials, debugging convenient, fast. |
compression | 4Kw pump station, shear equipment, pressure machine |
accessories | One manual |
The thickness of the material | 0.2mm—0.7mm |
Into the plate width | 1000mm |
Shelf life | 12 months |