Brief Introduction:
Paper machine technical parameters
Varieties: cardboard pape
Trim width: 1092mm
Reeling width: 1200mm
Ø Lip width of the headbox: 1500mm
Ø Basis quantitative: 90-200g/m2
Design speed: 120m/min
Working speed: 100/miN
Ø Transmission speed: 120m/min
Balance speed: 100m/min
Ø Nominal output: 10t/d
Gauge: 2100mm
Driving form: AC variable frequency speed control
Ø Arrangement form: one floor layout
This machine is: left (right)hand machin
Sizing consistency:0.3-0.8%
1.3 Paper shrinkage: 3%-4%
1.4 Dryness value of every part of paper machine
Out wire section ≥20-21%
After press section ≥44-45
After dryer section ≥ 92
Technical Specifications
1. Raw material: | Waste paper,wood pulp,carton paper |
2.Product Variety: | Kraft paper ,corrugated paper |
3.Paper width: | 1092mm |
4.Quantitative: | 80-300g/㎡ |
5.Design speed | 120m/min |
6.Working speed | 80-120m/min |
7.Rail gauge: | 2100mm |
8.Transmission way: | AC variable frequency,section drive |
9.Arrangement | Single floor layout |
10.Capacity: | 10T/D(24hours) |
Buying Guide
a. What kind of raw material you will use(main important)
b. The capacity you want produce per day(main important)
c. The paper weight you require.
d. The paper width you require.