Power Trunk Retrofit Kit for Soueast DX8 Plus / Prime and Jetour X70 Plus

Two popular Chinese SUVs, one carton. This power trunk retrofit kit ships with a control module and two labelled bracket sets that cover the Soueast DX8 Plus and Prime variants as well as the Jetour X70 Plus, so distributors can serve both model families from a single stock line. The plus-series tailgates on both cars are taller and heavier than the base versions, so the actuators are rated for the heavier panel and the module runs a slower, more controlled profile to keep such a large door steady through its arc.

What Buyers Get

• Electric tail gate lift kit with plus-series tuning — actuator force and stroke are matched to the taller Plus tailgates, so the door opens fully without over-travel and holds position when partly open.
• Automatic trunk opener for two model families — remote key, cabin button and handle switch operate the module on either vehicle; the original remotes are not replaced.
• Auto tailgate retrofit for X70 Plus and DX8 Plus — bracket sets are labelled per model and mount on the factory ball studs, so no drilling or cutting is needed on either car.
• Remote control power trunk — the supplied fob works up to 30 metres on a rolling code, and a second fob can be paired for fleet or family use.
• Obstruction reversal and height memory — both strokes are monitored, and the opening angle can be capped for low car parks.
• Plug-in harness with DIP fitment selection — the installer sets the model on the module and plugs in the matching adapter; no diagnostic tool or firmware update is required.

Specifications

Fitting Guidance

Start by identifying the vehicle and selecting the matching preset on the module housing. Both models use clipped rear trim panels; the DX8 Plus needs the trim lever along the glass edge first, while the X70 Plus releases from the grab-handle screws before the clips. Brackets bolt onto the original strut studs on each car, and the adapter plugs between the module and the factory tailgate connector. Typical first fit is 2 to 2.5 hours per model, 70 minutes for a repeat, and the conversion is reversible on both.

Market Fit

Exporters serving the Middle East, North Africa, Latin America and CIS markets where Jetour and Soueast volumes are rising fast; multi-brand accessory distributors who want a single SKU covering two SUVs; ride-hailing and tourism fleets; and mobile fitters who need one carton to serve several customer vehicles. Because both models are still in active production, spare parts support and repeat orders are predictable.

Packing and Warranty

Each set is packed in a printed carton with die-cut foam, two labelled bracket sets, two adapters and a bilingual fitting guide, inside a five-ply export box. Bench testing covers 400 duty cycles, reversal force, remote pairing, both actuator strokes and a standby current check. Production follows ISO 9001:2015; warranty is 24 months on actuators and 12 months on the control module.