Two compact-to-mid SUVs, one module. This kit supplies the control unit plus two labelled bracket and adapter sets covering the Soueast S06 and the Jetour Dashing, so a distributor can serve both model families from a single stock reference. The module is the heart of the system: it reads the trigger from the remote fob, the cabin button or the original tailgate handle, drives the actuator pair in sync, and falls into a low-draw sleep state between commands.
| Parameter | Specification |
|---|---|
| Compatible Models | Soueast S06, Jetour Dashing |
| System Voltage | 12V DC |
| Drive | Twin motorised actuators with ball-socket ends |
| Rated Thrust | 385 N per actuator |
| Tailgate Mass Supported | Up to 42 kg |
| Fitment Selection | DIP switch, two presets |
| Remote Range | Up to 30 metres, rolling code |
| Cycle Time | 6-8 seconds each direction |
| Safety | Bidirectional obstruction reversal, over-current cut-off, P-gear interlock |
| Sealing | IP54 module, IP65 actuators |
| Operating Range | -30 C to +80 C |
| Net Weight | 6.6 kg per set |
Set the module preset for the vehicle, then fit the bracket set with the matching model label. Both SUVs use clipped rear trim; the S06 upper panel releases first, while the Dashing trim comes away from the grab-handle screws before the clips. Brackets mount on the factory ball studs, the adapter plugs into the existing tailgate connector, and only the fused power lead and ground are wired directly. First fit is around 2 hours, repeats 60-75 minutes, fully reversible on both models.
Exporters supplying the Middle East, North Africa, Latin America and CIS markets where Soueast and Jetour compact SUVs are gaining share quickly; multi-brand accessory distributors who prefer one reference for two models; ride-hailing and car-sharing fleets; and mobile fitters working across mixed brand pools. Compact SUV owners tend to be younger buyers who respond well to remote-control convenience features.
Cartons hold the module, two labelled bracket sets, two adapters, fasteners and a bilingual fitting guide, protected by die-cut foam inside a five-ply export box. Each set is cycle-tested 400 times with checks on reversal force, synchronous travel, remote pairing and standby current. Production follows ISO 9001:2015; warranty is 24 months on actuators and 12 months on the control module.