Jbocnt Group Lithium Battery Power Connector 2+1+7P Lithium Battery Charging Plug 40A Suitable For EV Battery Charging And Discharging

Product advantages

I. Basic Overview of the 2+1+7 Electric Motorcycle Connector

The DM40 electric motorcycle connector is a standardized battery interface designed specifically for electric vehicles. This innovative design not only ensures a quick and secure connection between the battery and the vehicle, but also greatly simplifies the battery replacement process, allowing users to easily swap batteries, greatly enhancing ease of use. The connector incorporates multiple safety features, including waterproof and dustproof design, intelligent identification system, and abnormal status warnings, ensuring safe use in various complex environments and effectively preventing accidents caused by poor battery connection or misoperation.

II. Unique Design of the 2+1+7 Charge and Discharge Plug

The 2+1+7 charge and discharge plug is a key component of the DM60 connector system. Its design was inspired by in-depth consideration of battery charging and discharging efficiency and flexibility. The "2+1+7" design means that the plug supports two charging modes, one discharge mode, and seven safety protection strategies.

These two charging modes meet charging needs in different scenarios, such as fast charging and conventional charging, allowing users to choose the appropriate charging method based on their actual needs, ensuring charging efficiency and extending battery life. A discharge mode ensures battery stability and safety during power delivery.

Seven safety protection strategies, such as over-temperature protection, short-circuit protection, and over-current protection, comprehensively safeguard battery safety. These protection strategies monitor battery status in real time through intelligent algorithms. Once an abnormality is detected, appropriate measures are immediately taken to ensure safe and reliable charging and discharging every time.

III. Upgrades and Improvements to the DM40 Electric Motorcycle Connector

With the continuous advancement of technology and the increasing maturity of the market, the DM40 electric motorcycle connector is undergoing continuous upgrades and improvements. The following is a detailed discussion of its upgrade and improvement directions:

1. Enhanced Waterproof and Dustproof Performance: Electric motorcycles often encounter water during driving, requiring the connector to have a certain degree of waterproof performance. During the upgrade process, the DM40 connector uses more advanced waterproof materials and technologies to improve the connector's waterproof rating, ensuring that the internal structure remains dry even in heavy rain and effectively preventing dust and water intrusion.

2. Optimized Self-Locking Buckle Design: The stability of the connector is crucial to the safety of electric motorcycles. During the upgrade, the DM40 connector's self-locking buckle was optimized for a more secure fit and stability, making it resistant to high-frequency vibrations. This ensures the connector will not loosen or fall off when the scooter is traveling on bumpy roads, ensuring a smooth and safe ride.

3. Improved Conductivity: To meet the high power, long range, and high mileage current-carrying requirements of electric scooters, the DM40 connector was upgraded using higher-quality conductive materials and technologies. This significantly improves the connector's conductivity, enabling more efficient battery power output and enhancing the scooter's overall performance.

4. Intelligent Management: With the continuous development of IoT technology, intelligent management has become a key focus of connector upgrades. The DM40 connector was upgraded with intelligent management capabilities that enable real-time battery status monitoring, lifespan prediction, and potential failure warnings. This significantly reduces maintenance costs and improves overall operational efficiency.

Dimensional drawings (if the image is too small, please refresh the page again)

OUR CUSTOMERS

FAQ

‌1. Q: Are you a factory or a trading company? ‌
A: We are a connector manufacturer with 19 years of experience. We also hold ISO9001, CE, UL and other global certifications and support on-site factory inspections.

‌2. Q: What is the minimum order quantity (MOQ)? ‌
A: The MOQ of standard products is 500 pieces. Customized products need to be evaluated based on the process. Some products support 100 trial orders.

‌3. Q: Can free samples be provided? ‌
A: 1-2 free samples can be provided, but the customer needs to bear the international shipping costs; when there are many sample categories, the sample fee can be fully refunded after placing an order.

‌4. Q: What are the payment methods? ‌
A: Support T/T (30% advance payment + 70% see the copy of the bill of lading), LC, Paypal (small orders), specific details can be negotiated.

‌5. Q: How long is the delivery cycle? ‌
Answer: 15-20 days for conventional products, 25-30 days for customized products (including sample confirmation time), and an additional 10% fee is required for expedited orders.

‌6. Q: What should I do if there are quality problems? ‌
Answer: We provide a 12-month warranty. You can apply for return or reissue with the test report within 7 days after receiving the goods. Please consult the engineer for specific questions