The TLP265J is a photocoupler featuring a non-zero crossing photo triac optically coupled to an infrared LED. Housed in an SO6 package with enhanced creepage and clearance distances, it meets reinforced insulation class requirements of international safety standards. This device is suitable for Triac Drivers, Programmable Logic Controllers (PLCs), AC-Output Modules, and Solid-State Relays.
| Characteristic | Symbol | Rating | Unit | Note |
| Absolute Maximum Ratings | ||||
| Peak off-state voltage | VDRM | 600 | V | |
| R.M.S. on-state current | IT(RMS) | 70 | mA | |
| Isolation voltage | BVS | 3750 | Vrms | AC, 60 s, R.H. 60 % |
| Input forward current | IF | 50 | mA | (Note 1) |
| Input power dissipation | PD | 100 | mW | (Note 2) |
| Junction temperature | Tj | 125 | ℃ | (LED) |
| Junction temperature | Tj | 125 | ℃ | (Detector) |
| Operating temperature | Topr | -40 to 100 | ℃ | |
| Storage temperature | Tstg | -55 to 125 | ℃ | |
| Recommended Operating Conditions | ||||
| AC mains voltage | VAC | 240 | V | Max |
| Input forward current | IF | 25 | mA | Max |
| Operating temperature | Topr | 85 | ℃ | Max |
| Electrical Characteristics | ||||
| Input forward voltage | VF | 1.4 | V | IF = 10 mA (Max) |
| Peak off-state current | IDRM | 1000 | nA | VDRM = 600 V (Max) |
| Trigger LED current | IFT | 10 | mA | VT = 6 V (Max) |
| On-state current | IONP | 2 | A | (Note 3) |
| Turn-on time | ton | 100 | s | VD = 6 4 V, RL = 100 , IF = Rated IFT 1.5 (Max) |
| Total capacitance (input to output) | CS | 0.8 | pF | VS = 0 V, f = 1 MHz (Typ.) |
| Isolation resistance | RS | 1012 | VS = 500 V, R.H. 60% (Min) | |