ACPL-339J: Advanced 1.0 A Dual-Output Intelligent IGBT and Power MOSFET Gate Drive Optocoupler

The ACPL-339J is an advanced, easy-to-use, intelligent optocoupler designed for driving IGBT and Power MOSFETs. It features 1.0 A dual outputs and supports MOSFET buffers of various current ratings, enabling system engineers to scale gate drive designs for different power ratings without redesigning critical circuit isolation and short-circuit protection. This scalability makes it ideal for motor control and power conversion applications ranging from low to high power. The ACPL-339J integrates an AlGaAs LED optically coupled to an IC with two power output stages, active timing control to prevent cross-conduction, VCE detection, under-voltage lockout (UVLO), 'soft' IGBT turn-off, and isolated open collector fault feedback for enhanced design flexibility and circuit protection. It offers an insulation voltage of VIORM = 1414 Vpeak per IEC/EN/DIN EN 60747-5-5.

Key Features

• Dual output drive for external NMOS and PMOS buffer
• 1.0 A minimum peak output current
• Active timing control to prevent cross conduction in MOSFET buffer
• IGBT desaturation detection
• Isolated DESAT and UVLO fault feedback
• Configurable Soft shutdown during fault
• Under Voltage Lock-Out Protection (UVLO) with Hysteresis
• 300 ns maximum propagation delay over temperature range
• Low LED input current (6.0 mA to 10.0 mA)
• 25 kV/s Minimum Common Mode Rejection (CMR)
• Wide Operating VCC Range: 15 V to 30 V
• Industrial temperature range: -40 C to 105 C
• SO-16 package

Applications

• IGBT/Power MOSFET gate drive Interface
• AC and brushless DC motor drives
• Renewable energy inverters
• Industrial Inverters
• Switching power supplies

Product Attributes

• Package: SO-16
• Safety Approvals Pending: UL Recognized (5000 VRMS), CSA, IEC/EN/DIN EN 60747-5-5

Technical Specifications