Manual Laser Welding Machine For Mould Repairing 200W Crane Design Die Laser Welder

Product introdution:

This series of laser welding machines produced by our company is a special model specially tailored for the mold industry by our company. This machine is specially used to replace the traditional argon welding machine for product welding.The key components of the machine are all imported products from abroad. The software operation interface adopts a large-screen LCD screen to display the full Chinese interface. The interface is simple and clear, and the operator is easy to learn and use. Multiple pre-storage operation modes, self-programming, permanent memory function, applicable to various materials.The heat-affected zone is small and will not cause deformation of precision molds. The welding depth is large and the welding is firm. Fully melted, leaving no traces of repair. There is no depression in the joint between the convex part of the molten material in the bath and the substrate.

Features:

• Can repair cracks, chipped corners, touch edges and depleted sealing edges
• Can be welded on hard materials (~HRC60)
• High accuracy, laser welding spot diameter is only 0.3mm~2.0mm
• The heated area is small and the processed parts will not be deformed
• Low oxidation rate, the workpiece will not change color
• No porosity or trachoma after welding
• The welding part can be processed, especially suitable for mold repairs with polishing requirements
• After welding, the workpiece can reach 50~60 Rockwell hardness
• After welding, the pattern can be etched without affecting the effect

Technical details:

Applicable materials and fields:

Repair cracks, collapsed horn, touched edge and damaged sealing side, welding on horniness materials.

Samples for reference: