Product Overview

The B&R 8V1320.00-2 is a high-power ACOPOS servo drive for demanding industrial motion axes. It operates from a three-phase 400 to 480 VAC supply and provides 34 A continuous output current with a nominal motor power rating of 16 kW.

This model combines a high-capacity servo power stage with an integrated line filter, DC-bus power supply, braking capability and modular interface architecture. It is designed for machinery requiring controlled acceleration, positioning, speed regulation and torque control at higher power levels.

Main Features

• Three-phase 400 to 480 VAC mains input
• 34 A continuous motor current
• Nominal motor power rating of 16 kW
• Maximum installed load of 30 kVA
• Four configurable plug-in module slots
• Integrated line filter according to EN 61800-3 Category C3
• Integrated or optional external braking-resistor arrangement
• Integrated DC-bus power supply unit
• Electronic restart inhibit and motor-output protection

Technical Specifications

Compatible System and Applications

The 8V1320.00-2 is suitable for larger ACOPOS-controlled axes in printing, plastics processing, material handling, converting, packaging and automated production machinery. The connected motor, encoder, communication network and control project must all be selected as one coordinated system.

Maintenance and Replacement Notes

Verify the complete model 8V1320.00-2, mains voltage, cabinet protection, motor current, braking arrangement and all four plug-in modules. A physically similar ACOPOS drive may have a different power rating or hardware revision and should not be installed without engineering verification.

Because this is a higher-power drive, the upstream protective devices, conductor sizes, grounding, cooling clearance and braking-resistor design must also be checked before commissioning.

Related Models

Related models include 8V1180.00-2 and other ACOPOS 8V series drives. Selection should be based on the complete machine electrical design rather than using nominal power alone.

Inquiry and Supply Notes

For replacement verification, provide the drive nameplate, motor nameplate, installed plug-in module numbers, cabinet wiring diagram, controller project version and braking-resistor information. Confirm whether connector and shield sets are also required.