The motor can be designed &manufactured with customized request.
Description
48mm NEMA 17 Geared Stepper Motor Casun Hybrid Stepper Motor
Deceleration stepper motor 440mN 0.5kg NEMA17 42mmx42mm stepper gear motor for chemical instruments and other industries.
The 42mm Hybrid Stepper Motor Series offers powerful holding torque in a variety of sizes.
Use with a microstepping driver to reduce vibration and achieve higher step resolution.
Choose a baseline version or request your own customized configuration.
Features
Bipolar or unipolar versions available
Hybrid stepper construction
Available in single or double shaft versions
CE and RoHS approved
Customizations on request
Dimensions
Motor Specifications
Step Angle
1.8°
Frame Size
42mm
Number of Phase
2 Phase
Rated Current
1.68Amp
Holding Torque
440 mN.m
Resistance
1.65Ω
Inductance
2.8mH
Rotor Inertia
38g-cm²
Motor Weight
0.5kg
Gear Reduction Ratio
5.18:1
Connection
Bipolar
Operating Specifications
Motor
Step Angle
1.8°
Maximum Temperature
80°C maximum
Ambient Temperature
-20°C to 50°C
Storage Temperature
-20°C to 100°C
Humidity Range
85% or less, non-condensing
Magnet Wire Insulation
Class B 130°C
Insulation Resistance
100M Ohm at 500 VDC
Dielectric Strength
500 VDC for 1 min
Gear Box
Housing Material
Metal
Bearing at Output
Ball Bearings
Max. Radial Load (12mm from flange)
≤80N
Max. Shaft Axial Load
≤30N
Radial Play of Shaft (near to Flange)
≤0.06mm
Axial Play of Shaft
≤0.3mm
Backlash at No-load
1.5°
Submodels
Motor Length
Length of Gearbox
Ratio
Efficiency
34 mm
27.2 mm
3.71
90%
40 mm
5.18
35 mm
48 mm
13.76
60 mm
19.2
26.8
42.7 mm
51
70%
71
99.5
139
Custom Solutions Available
If our standard motor cannot meet your needs, we can customize the motor according to your requirements.
Customized content includes but is not limited to special shafts, winding parameters, installation dimensions,
lead wires with special requirements, connectors, etc.