ADIS16488 Replacement MEMS Inertial Measurement Unit Sensor SPI Output for Land Vehicle
Key Specifications
Attribute | Value |
Dynamic measuring range | ±450°/s |
Zero-bias instability | 0.3°/h |
Random walk | 0.15º/√h |
Scale factor repeatability | 100ppm |
Bandwidth (-3dB) | 250Hz |
Acc Range | ±20g |
Acc Zero bias stability | 0.07mg |
Communication Interface | 1-way SPI |
Product Overview
The 16488HA inertial measurement unit is a complete inertial system with a built-in three-axis gyroscope and a three-axis accelerometer, which is used to measure the three-axis angular rate, acceleration and other parameters of the carrier. The unit outputs the data after comprehensive error compensation (including temperature compensation, installation misalignment angle compensation, nonlinear compensation, etc.) through SPI according to the communication protocol.
Detailed Technical Parameters
Parameter | Test conditions | Minimum value | Typical value | Maximum value | Unit |
Gyroscope |
Dynamic measuring range | | | | ±450 | º/s |
Zero-bias instability | Allan variance, better than | | 0.3 | | º/h |
Zero bias stability | 10s smooth, RMS, better than | | 3 | | º/h |
Zero bias in full temperature range | -40 ℃ ~ 85 ℃, 10 s smooth, rms | | 20 | | º/h |
Random walk | 1σ | | 0.15 | | º/√h |
Zero-bias repeatability | 1σ | | 5 | | º/h |
Scale factor repeatability | 1σ | | 100 | | ppm |
Scale factor nonlinearity | 1σ | | 100 | | ppm |
Bandwidth (-3dB) | | | 250 | | Hz |
Cross coupling | | | 0.1 | | % |
Resolution | | | 2 | | º/h |
Acceleration sensitivity | | | 2 | | °/h/g |
Accelerometer |
Dynamic measuring range | | | | ±20 | g |
Zero bias stability | Allan variance | | 0.07 | | mg |
Zero bias in full temperature range | -40 ℃ ~ 85 ℃, 10 s smooth, rms | | 3 | | mg |
Zero bias stability | 10s smooth, RMS, better than | | 0.25 | | mg |
Random walk | 1σ | | 0.029 | | m/s/√h |
Zero-bias repeatability | 1σ | | 0.5 | | mg |
Scale factor repeatability | 1σ | | 500 | | ppm |
Scale factor nonlinearity | FS=20g | | 500 | | ppm |
Bandwidth (-3dB) | | | 250 | | Hz |
Cross coupling | | | 0.1 | | % |
Communication Interface |
1-way SPI | Enter the clock frequency | | 8 | 15 | MHz |
Electrical characteristics |
Voltage | Direct current | | 3.3 | | V |
Power consumption | | | 1.5 | 1.5 | W |
Ripple | P-P | | 48±2 | 100 | mV |
Use environment |
Operating temperature | | -45 | | 85 | ℃ |
Storage temperature | | -55 | | 85 | ℃ |
Outline Structure