150x50mm Eco Friendly WPC Tube Composite Cladding Laminated Surface Treatment
Product Summary
Fabricated from recycled wood fibers, this eco-friendly WPC tube cladding system supports sustainable building standards. Shipping with direct factory supply guarantees international purchasing agents uniform batch quality control and competitive wholesale pricing.
Product Features
-
Green Building Project Certified Eco Composition
Composed of reclaimed wood sawdust and clean recycled polymers reducing deforestation footprints and securing eco points for your construction.
-
Streamlined Direct Factory Price Quotes
Buying straight from the manufacturer floor gives you uncompromised cost structures that amplify your localized market retail profit.
-
100 Percent Recyclable Building Profile
Enhances your environmental portfolio as all scrap pieces can be safely reprocessed without creating hazardous landfill waste.
-
Transparent Lead Times and Mass Production
Direct factory scheduling means you get real-time updates directly from the extrusion shop floor ensuring no delivery surprises.
Technical Specifications
| NO. |
Test Items |
Requirements |
Results |
Test Methods |
| 1 |
Surface abrasion resistance,g/100r |
≤0.15,and the paint film is not worn through |
0.100 |
✔pass |
| 2 |
Colour fastness to light, class |
Gray Card≥4 |
4 |
✔pass |
| 3 |
Formaldehyde emission,mg/m³ |
≤0.05 |
Not detected |
✔pass |
| 4 |
Minimum concentrated load, N |
≥3400 |
3492 |
✔pass |
| 5 |
Static bending strength,MPa |
≥26.0 |
26.5 |
✔pass |
| 6 |
Elastic modulus, MPa |
≥3000 |
4600 |
✔pass |
| 7 |
Water absorption, % |
≤1.0 |
0.9 |
✔pass |
| 8 |
Falling hammer impact at low temperature |
No crack at the temperature of -10°C |
pass |
✔pass |
| 9 |
Anti-slippery value |
≥35 |
36 |
✔pass |
How to Install
-
Jointing Methods
- Connector joint: Use matching metal/plastic internal/external connectors. Pre-drill holes + fix with stainless steel self-tapping screws.
- Adhesive bonding: Apply WPC-specific adhesive/structural glue. Clean → glue → join → clamp → cure (24h).
- 45° miter joint: Cut ends at 45° for corners; secure with angle brackets and screws.
-
Fixing Methods (Wall/Ceiling/Partition)
- Clip-on (quick install): Use aluminum spring clips to attach directly to metal studs/frames; no screws, removable.
- Bracket/angle fix: Use stainless steel L-brackets. Pre-drill tube walls, fasten to wall/ceiling substrate.
- Pipe clamps/hangers: For horizontal runs, use U-clamps/hangers on light steel keels; spacing ≤ 60cm.
- Post mounting (fence/grille): Embed posts in concrete or fix to ground with flange plates + expansion bolts.
-
Key Installation Tips
- Cutting: Use fine-tooth saw/circular saw; keep cuts clean and deburred.
- Expansion gap: Leave 3-5mm between tubes for thermal expansion.
- Pre-drill: Always pre-drill before screwing (hole ≈ 3/4 screw diameter) to avoid cracking.
- Drainage: Install outdoor tubes with slight slope or drill drain holes to prevent water buildup/mold.
FAQ
Q1: What percentage of recycled material is inside this eco friendly WPC tube?
A1: Our composition features 60% reclaimed natural wood fiber, 30% recycled high density polymers, and 10% essential eco additives.
Q2: Does ordering direct factory supply mean I can customize unique colors?
A2: Yes, because you are buying direct, we can formulate customized color matches to fit your corporate design requirements for wholesale volume orders.
Q3: Does the recycled fiber compromise the mechanical strength of the cladding?
A3: No, the timber fibers undergo intense heat refinement blending flawlessly with polymers to deliver superior high impact strength.
Q4: Can we schedule a real time video inspection of your production plant?
A4: Absolutely, we welcome live video workshop tours via online meetings to show our massive extrusion lines and raw material compounding setup.