90 KV Semiconductor Inspection Equipment with High Digital FPD and SEGS/GEM Integration
Key Advantages
- Open type X-ray tube with unlimited service life
- New generation 5" HD digital flat panel detector (FPD)
- FPD tilts 60° and rotates 360° for optimal positioning
- Automatic navigation window - table moves to clicked positions
- 400*400mm table with 10kg load capacity
- Speed adjustable 5-axis linkage system
- Optional ACT and PCT 3D CT functionality
- Easy operation with 2 hours training
Hardware Specifications
X-ray Source
| Type |
Open, microfocus |
| Maximum Tube Voltage |
160kV |
| Maximum Tube Current |
500μA |
| Target Power |
15W |
| Tube Power |
65W |
| Focal Spot Size |
1μm |
Flat Panel Detector
| Effective Area |
130mm*130mm |
| Pixel Size |
49.5μm |
| Resolution |
1536*1536 |
| Frame Rate |
20fps |
| Tiltable Angle |
60° |
| Rotation Angle |
360° |
Table Specifications
| Size |
400mm*400mm |
| Detectable Area |
400mm*400mm |
| Maximum Load |
10kg |
Equipment Details
| Geometry Magnification |
2500X |
| Inspection Speed |
Maximum 3.0s/point |
| Dimensions |
1550mm (L) * 1600mm (W) * 1700mm (H) |
| Weight |
1800kg |
| Power Supply |
AC110-220V 50/60HZ |
| Maximum Power |
1800W |
| Industrial PC |
I7 CPU, 16G RAM, 240GB SSD+1TB HDD |
| Display |
24" HDMI LCD |
Safety Features
| Radiation Leakage |
No leakage |
| Lead Glass Observation Window |
Transparent lead glass shields radiation for internal status observation |
| Window and Back Door Safety Interlock |
X-ray tube powers off immediately when opened; prevents X-ray activation when open |
| Electromagnetic Safety Switch |
Locks when X-ray is active, preventing window opening |
| Emergency Stop |
Located near operation position for immediate power cutoff |
| Tube Protection |
Prevents software exit without closing X-ray tube |
Working Principle
X8800 Semiconductor Inspection Equipment Working Principle
Software Capabilities
Core Functions
| Function Module |
Operation |
| X-ray Tube Control |
Mouse-click activation with real-time voltage/current display and adjustment |
| Status Bar |
Visual indication of interlock, pre-heat, and X-ray status |
| Image Effect Adjustment |
Brightness, contrast and gain controls for optimal imaging |
| Product List |
Save and recall inspection parameters for efficiency |
| Navigation Window |
Click-to-move table positioning with camera guidance |
| Motion Axis Status |
Real-time coordinate display |
| Inspection Result |
Organized display of measurement data |
| Speed Control |
Slow, normal, fast |
Voids Rate Measurement
| Feature |
Description |
| Automatic Calculation |
Rectangle-based solder ball analysis with automatic void detection and NG/OK indication |
| Parameters Adjustment |
Customizable grayscale threshold, pixel, contrast, and size filtering |
| Manual Void Addition |
Polygon or free-form drawing for custom void calculation |
| Parameter Saving |
Store and recall detection parameters for consistent results |
Additional Measurement Functions
| Function |
Application |
| Distance |
Vertical distance measurement from point to baseline |
| Distance Rate |
Through-hole soldering rate calculation via percentage ratio |
| Angle |
Angle measurement between defined rays |
| Radius |
Circular component measurement (solder balls) for circumference, area, radius |
| Perimeter |
Square component measurement for length, width, and area |
Automated Inspection Modes
| Mode |
Description |
| Manual Setting |
Custom inspection point placement with automatic imaging |
| Array |
Grid-based automatic inspection from minimal setup parameters |
| Automatic Identification |
Feature-based position recognition with automated measurement and imaging |
Application Examples
BGA Solder Bridge Inspection
BGA Solder Voids Analysis
PCB Through-Hole Inspection
IC Voids and Gold Wire Inspection
LED Solder Voids Detection
LED Gold Wire Crack Analysis
Capacitor Internal Structure Inspection
Inductor Component Analysis
Sensor Component Inspection
Thyristor Surge Suppressors Analysis
Fiberglass Material Inspection
Cable Internal Structure Analysis
Diode Component Inspection
Steel Pipe Welding Gap Measurement
Automotive Electronics Inspection