MachineU > China Products > Machinery
X-ray Inspection Equipment with a 400*400mm Table and 360° rotation jig optional
X-ray Inspection Equipment with a 400*400mm Table and 360° rotation jig optional
Specifications
Brand Name :
WELLMAN
Model Number :
X-ray X8800
Certification :
CE,FDA，ISO 9001
Place of Origin :
China
Payment Terms :
T/T
Description
1. Key Advantages
  • Open X-ray tube: no service life limit, only filament replacement needed
  • New-gen 5” HD FPD with 60° tilt and 360° rotation
  • 400*400mm 10KG-load worktable + auto navigation window + speed-adjustable 5-axis linkage
  • Optional ACT/PCT 3D CT functions for extended detection
  • User-friendly operation: 2-hour training, fast defect locating
2. Hardware Parameters
X-ray source Type Open, microfocus
Max tube voltage 160kV
Max tube current 500μA
Target power 15W
Tube power 65W
Focal spot size 1μm
Flat panel detector Effective area 130mm*130mm
Pixel size 49.5μm
Resolution 1536*1536
Frame rate 20fps
Tiltable angle 60°
Rotation angle 360°
Table Size 400mm*400mm
Detectable area 400mm*400mm
Max load 10kg
Equipment Geometry Magnification 2500X
Inspection speed Max 3.0s/point
Dimensions 1550mm (L) * 1600mm (W) * 1700mm (H)
Weight 1800kg
Power supply AC110-220V 50/60HZ
Max power 1800W
Industrial PC I7 CPU, 16G RAM, 240GB SSD+1TB HDD
Display 24” HDMI LCD
Safety Radiation leakage No leakage, international standard: ≤1μSv/h
Lead glass observation window Transparent lead glass window shields radiation to observe the inner status.
Window and back door safety interlock Once users open the window or back door, X-ray tube will power off immediately. When the window or back door is open, users can’t turn on the X-ray.
Electromagnetic safety switch Lock once the X-ray is on, users can’t open the observation window.
Emergency stop Next to the operation position, press to power off
Tube protection User can't leave the software to if you don't close the X-ray tube.
3. Working Principle
X-ray Inspection Equipment with a 400*400mm Table and 360° rotation jig optional
4. Software Function
Function module Operation Keyboard and mouse can finish all operations
X-ray tube control Using mouse to click the X button can turn on or off the X-ray. The real-time tube voltage and current value will display beside, users can click up and down button, or drag the slider, or type to adjust.
Status bar Indicates the interlock status, pre-heat status, and X-ray status by flashing alternately red and green.
Image effect adjustment The brightness, contrast and gain of the image can be adjusted freely to achieve a satisfactory result.
Product list Users can save the inspection parameters such as Z-axis position, brightness, contrast and gain, and can directly call the parameters when inspecting the same product, to improve the inspection efficiency.
Navigation window After the camera takes a photo of the table, click anywhere in the photo, the table will move to the place you click and display on the screen.
Motion axis status Display real-time coordinates.
Inspection result The measurement results (voids rate, distance, area, etc., set by users) display in order.
Speed control The movement speed of each axis can be adjusted to slow, normal and fast.
Voids rate measurement Automatic calculation Click on two points to determine a rectangle. The software automatically finds and measures the edge of the solder ball in the rectangle, the pad and the internal voids, and can get the data of the voids rate, the area of the solder ball, the circumference, the biggest void’s rate, the length and the width, and indicates NG or OK by red and green.
Parameters adjustment Users can adjust the grayscale threshold, pixel, contrast, size filtering and other parameters to get accurate results of automatic calculation.
Add voids manually Users can draw a polygon or a free figure and calculate it as a void into the void rate.
Save parameters Users can save parameters such as grayscale threshold, pixel, contrast, size filtering and other parameters, and can directly call the parameters when detecting the same product, to improve the detection efficiency.
Other measurement function Distance Click the A and B points to set as the baseline, then click the C point to measure the vertical distance from the C point to the baseline.
Distance rate It is mostly used to measure the soldering rate of the through-hole. Set one more point “D” than the distance. Divide the vertical distance from the D point to baseline by the vertical distance of the C point, to obtain the percentage ratio of the vertical distance of D to C.
Angle Click the A and B points to set as the baseline, then click the C point to measure the angle between the BA and BC rays.
Radius It is mostly used to measure round components such as solder balls. Click three points to determine a circle and measure the circumference, area and radius.
Perimeter It is mostly used to measure square components, click two points to determine a square, measure the length, width and area.
Automatic inspection Manual setting Users can set any positions on the table as inspection points, the software will automatically inspect and save the picture.
Array For the regular inspection points, users only need to set two of the inspection points and the number of rows and columns, the software will automatically inspect each point and save pictures.
Automatic identification For inspection points with obvious features, the software automatically identifies the positions, takes measurements, and saves the image.
5. Application Example

BGA solder bridge

X-ray Inspection Equipment with a 400*400mm Table and 360° rotation jig optional

BGA solder voids

X-ray Inspection Equipment with a 400*400mm Table and 360° rotation jig optional

PCB through-hole

X-ray Inspection Equipment with a 400*400mm Table and 360° rotation jig optional

IC voids and gold wire

X-ray Inspection Equipment with a 400*400mm Table and 360° rotation jig optional

LED solder voids

X-ray Inspection Equipment with a 400*400mm Table and 360° rotation jig optional

LED gold wire crack

X-ray Inspection Equipment with a 400*400mm Table and 360° rotation jig optional

Capacitor

X-ray Inspection Equipment with a 400*400mm Table and 360° rotation jig optional

Inductor

X-ray Inspection Equipment with a 400*400mm Table and 360° rotation jig optional

Sensor

X-ray Inspection Equipment with a 400*400mm Table and 360° rotation jig optional

Thyristor surge suppressors

X-ray Inspection Equipment with a 400*400mm Table and 360° rotation jig optional

Fiberglass

X-ray Inspection Equipment with a 400*400mm Table and 360° rotation jig optional

Cable

X-ray Inspection Equipment with a 400*400mm Table and 360° rotation jig optional

Diode

X-ray Inspection Equipment with a 400*400mm Table and 360° rotation jig optional

Steel pipe welding gap

X-ray Inspection Equipment with a 400*400mm Table and 360° rotation jig optional

Automobile electronics

X-ray Inspection Equipment with a 400*400mm Table and 360° rotation jig optional
Send your message to this supplier
Send Now

X-ray Inspection Equipment with a 400*400mm Table and 360° rotation jig optional

Ask Latest Price
Product Detail
Brand Name :
WELLMAN
Model Number :
X-ray X8800
Certification :
CE,FDA，ISO 9001
Place of Origin :
China
Payment Terms :
T/T
Contact Supplier
X-ray Inspection Equipment with a 400*400mm Table and 360° rotation jig optional

SHENZHEN WEIMING PHOTOELECTRIC CO.,LTD.

Verified Supplier
1 Years
shenzhen
Since 2018
Business Type :
Manufacturer
Main Products :
X Ray Counter, PCB X Ray Machine, SMD Tower
Certification Level :
Verified Supplier
Discover similar products
View More

Find Similar Products By Category:

Supplier Homepage Products 3D X Ray Inspection
MachineU China Products Machinery
Contact Supplier
Submit Requirement