Safe Zero Leakage Auto-fully X Ray Inspection System with Easy Operation and Fast Training
Working Principle
Core Advantages
- Closed type X-ray tube with over 10,000 hours lifetime, maintenance-free
- New generation 5" HD digital flat panel detector (FPD)
- Automatic navigation window - table moves to where you click
- Belt transmission with width adjustment by lead screw & guide rail, max width 620mm
- 6-axis motion system equipped with servo motor, X-ray tube and FPD move in sync
- Edit inspection procedures for automated inspection in large quantities
- Easy to operate with quick defect finding - only 2 hours training required
Hardware Specifications
X-ray Source
| Type |
Closed, microfocus |
| Max Tube Voltage |
90kV |
| Max Tube Current |
200μA |
| Focal Spot Size |
5μm |
| Function |
Auto preheat |
Flat Panel Detector
| Brand |
IRay |
| Effective Area |
130mm × 130mm |
| Pixel Size |
85μm |
| Resolution |
1536 × 1536 |
| Frame Rate |
20fps |
| Tiltable Angle |
60° |
Inspection
| Transmission |
Belt |
| Motor |
Servo motor |
| Detectable Area |
Length 520mm, width 80-430mm adjustable |
| Max Load |
10kg |
Equipment
| Magnification |
Geometry 200X | System 1500X |
| Inspection Speed |
Max 3.0s/point |
| Dimensions |
2600mm (L) × 1300mm (W) × 1800mm (H) |
| Host Machine Dimensions |
1400mm (L) × 1300mm (W) × 1800mm (H) |
| Weight |
2200kg |
| Power Supply |
AC110-220V 50/60HZ |
| Max Power |
3000W |
| Industrial PC |
I7 CPU, 16G RAM, 240GB SSD + 1T HDD |
| Displayer |
24" HDMI LCD |
Safety
| Radiation Leakage |
No leakage, international standard: ≤1μSv/h |
| Lead Glass Observation Window |
Transparent lead glass window shields radiation to observe inner status |
| Window and Back Door Safety Interlock |
X-ray tube powers off immediately when window or back door is opened |
| Electromagnetic Safety Switch |
Locks when X-ray is on, preventing observation window opening |
| Emergency Stop |
Located next to operation position, press to power off |
| Tube Protection |
Software prevents leaving without closing X-ray tube |
Software Functions
- Full mouse and keyboard control for all operations
- Real-time X-ray parameter adjustment and status monitoring
- Image brightness, contrast and gain fine-tuning
- One-click navigation and automatic table positioning
- Automatic void rate calculation and defect judgment
- Multi-type measurement: distance, angle, radius, perimeter
- Batch automatic inspection via point or array mode
Typical Applications
BGA solder inspection, PCB through-hole detection, IC and LED assembly check, capacitor and inductor testing, automotive electronics, cable and fiberglass analysis.
BGA Solder Bridge
BGA Solder Voids
PCB Through-Hole
IC Voids and Gold Wire
LED Solder Voids
LED Gold Wire Crack
Capacitor
Inductor
Sensor
Thyristor Surge Suppressors
Fiberglass
Cable
Diode
Steel Pipe Welding Gap
Automobile Electronics