Short-Term Procurement Cost Optimization
As large-sized heavy equipment, the unit procurement cost is higher than that of conventional-sized welding tables. However, it can replace multiple smaller welding tables used in combination, reducing the number of equipment purchases and workshop floor space, thus lowering overall investment.

Long-Term Operating Cost Savings
Labor costs reduced by over 60%: The three-dimensional hole system allows for rapid positioning, shortening the clamping time for a single workpiece from the traditional 30 minutes to within 5 minutes, reducing auxiliary working hours such as marking and measurement.
Rework costs reduced to below 0.5%: High-precision positioning of ±0.05mm ensures welding dimensional consistency, significantly reducing material scrap and rework costs caused by dimensional deviations.
Extremely low maintenance costs: The nitrided table surface is wear-resistant and resistant to welding slag. Within its 10-year lifespan, only regular cleaning of the holes is required, and maintenance costs are less than 10% of those for ordinary painted table surfaces.

Return on Investment Period
For customers engaged in mass production of engineering machinery, automobile chassis, etc., the return on investment period can be controlled within 8-12 months, and the long-term cost-effectiveness is significantly higher than traditional welding fixtures.

Temperature Resistance and Impact Resistance
The tabletop is made of Q355 alloy steel plate / HT300 cast iron, which can withstand the direct impact of high-temperature welding slag above 1200℃ for short periods without local melting, cracking, or deformation. Professional testing shows it can withstand the impact of a 25kg object falling from a height of 1m without significant loss of hole position accuracy.
The reinforcing ribs at the bottom of the tabletop are fully welded, with welding thermal deformation ≤0.03mm/1000mm. It maintains high-precision positioning even during 24-hour continuous welding operations.

Corrosion Resistance and Weather Resistance
The plasma nitrided tabletop forms a dense hardened layer, resisting corrosion from cooling fluids in automotive workshops, oil stains in construction machinery workshops, and salt spray in coastal areas. It remains rust-free during long-term use in environments with humidity above 85%, with a service life of over 15 years.
The equipment can operate stably in a wide temperature range of -30℃ to 70℃, suitable for extreme scenarios such as open-air welding in high-cold regions and continuous production in high-temperature workshops.

Dustproof and Easy-to-Clean Design
The 28mm positioning holes have built-in dustproof silicone sealing rings to prevent workshop dust and iron filings from entering and causing blockages. The sealing rings can be individually removed and replaced, resulting in low maintenance costs.
The nitrided tabletop surface is smooth and non-stick to welding slag. After welding, it can be quickly cleaned with a high-pressure air gun or wire brush, without the need for chemical cleaning agents, improving cleaning efficiency by 70%.

Contact Us

With precise scales of a 28mm hole system, it embodies the craftsmanship required for welding heavy workpieces; and with the stable performance of a 120*60 inch large worktable, it empowers efficient production in intelligent manufacturing.

WUXI LEMAR is deeply rooted in the field of welding equipment, providing reliable 3D welding solutions for industries such as automotive manufacturing and construction machinery, with CE certified quality, nitriding wear-resistant technology, and modular design.

Partnering with global partners, we build our foundation on precision and win the future through innovation!