Hard Anodizing Plant for Industrial Tools

Hard Anodizing Plant Overview:

This hard anodizing plant is designed for industrial tools. It forms 60μm thick, hard coatings, increasing the durability and wear resistance of tools. The high - temperature - resistant structure allows continuous operation. With an automatic quality inspection function, it ensures each tool meets strict standards, improving the competitiveness of industrial tool manufacturers.

Partial parameter description of Hard Anodizing Plant:

Basic composition and technical requirements of equipment

Filter:

The circulating filter device is set, the filtration accuracy is 20μ, the flow rate is 20T/h, the filtration pump is Taiwan "national treasure" chemical special pump, and the filtration bucket material is SS.

1-2-3 piping:

1) Inlet pipe: Ø3/4" PVC pipe (with fittings/spherical valve)

2) Drainage pipe: Ø 1-1/2" SS pipe (with fittings/spherical valve)

3) Stirring: air stirring (Ø3/4" SS pipe)

For a complete technical solution of Hard Anodizing Plant, please contact me. We will customize the design based on your product technical requirements and factory layout.

Basic process flow Of Gantry Type Anodizing Oxidation Assembly:

Feed material → 1 Chemical degreasing → 2 Water washing → 3 Alkali etching → 4 Water washing → 5 Water washing → 6 Acid washing → 7 Water washing → 8 Water washing → 9 Anodizing → 10 Anodizing → 11 Anodizing → 12 Water washing → 13 Water washing → 14 Coloring → 15 Water washing → 16 Coloring → 17 Water washing → 18 Coloring → 19 Water washing → 20 Coloring → 21 Water washing → Unloading

Working conditions Of Hard Anodizing Plant:

Our typical customers:

Installation and training Of Hard Anodizing Plant:

1. Installation

1) The seller shall provide all details of the equipment installation to the user in order to prepare the installation site.

2) The seller shall install and debug the equipment at the user's factory site.

2. Training

During the installation, the seller provides on-site training for plant operators, including normal operation, maintenance, analysis of operational problems and emergency procedures.