Continuous Automated Anodizing Line for High - volume Production

Automated Anodizing Line Overview:

The continuous anodizing line is tailored for high - volume production. Its linear - conveyor structure enables uninterrupted processing, slashing production time by 40%. The advanced electrolyte circulation system maintains consistent coating quality. Capable of handling 3000 parts per hour, it’s a top choice for large - scale manufacturers aiming to boost productivity.

Partial parameter description of Automated Anodizing Line:

Tank 3, 5, 6, 8, 9, 13,14,16,18,20,22:11 washing tanks

structure:

Made of Taiwan Lida 15mm PP material, the tank is guaranteed not to deform and not to leak, with good corrosion resistance and beautiful appearance. The bottom of the tank is equipped with a side drainage port

1) Tank size: 800 x 4000 x 1600mm (L x W x H)

2) Reinforcement of the tank: A3 material 80x40x4mm square steel is used, and 6mm PP board of the same color is welded after three layers of rust prevention.

3) Reinforcement of the tank edge: chamfer welding of PP material with a thickness of 15mm and the same color

4) This tank is equipped with an overflow device, and the overflow port is in the form of rectangular diagonal overflow along one side, and the water overflows into the drainage main pipe.

piping:

1) Inlet pipe: Ø3/4" PVC pipe (with fittings/spherical valve)

2) Drainage pipe: Ø 3 "" PVC pipe (with fittings/drainage ball valve)

3) Stirring: air stirring (Ø3/4" PVC pipe)

For a complete technical solution of Automated Anodizing Line, please contact me. We will customize the design based on your product technical requirements and factory layout.

Basic process flow Of Automated Anodizing Line:

Feed material → 1 Chemical degreasing → 2 Water washing → 3 Alkali etching → 4 Water washing → 5 Water washing → 6 Acid washing → 7 Water washing → 8 Water washing → 9 Anodizing → 10 Anodizing → 11 Anodizing → 12 Water washing → 13 Water washing → 14 Coloring → 15 Water washing → 16 Coloring → 17 Water washing → 18 Coloring → 19 Water washing → 20 Coloring → 21 Water washing → Unloading

Working conditions Of Automated Anodizing Line:

Our typical customers:

Installation and training Of Automated Anodizing Line:

1. Installation

1) The seller shall provide all details of the equipment installation to the user in order to prepare the installation site.

2) The seller shall install and debug the equipment at the user's factory site.

2. Training

During the installation, the seller provides on-site training for plant operators, including normal operation, maintenance, analysis of operational problems and emergency procedures.