MachineU > China Products > Tools & Hardware > Hardware > Springs
Car W253 GLC 4WD Spring Shock Absorber Core Replacement For Mercedes Benz
Car W253 GLC 4WD Spring Shock Absorber Core Replacement For Mercedes Benz
Car W253 GLC 4WD Spring Shock Absorber Core Replacement For Mercedes Benz
Car W253 GLC 4WD Spring Shock Absorber Core Replacement For Mercedes Benz
Car W253 GLC 4WD Spring Shock Absorber Core Replacement For Mercedes Benz
Car W253 GLC 4WD Spring Shock Absorber Core Replacement For Mercedes Benz
Specifications
Brand Name :
FHD
Model Number :
Mercedes Benz 253 4WD
Certification :
ISO 9001
Place of Origin :
China
MOQ :
1 pc
Price :
Negotiable
Payment Terms :
D/A,D/P,T/T,Western Union
Supply Ability :
5000 Sets/month
Delivery Time :
3-15days
Packaging Details :
Carton
Warranty :
2 years
Position :
Front/L
Packing :
Carton
Condition :
New
Purpose :
Replace/ Repair
Description
253 Mercedes-Benz GLC 4WD Front Left Air Shock Cartridge Core Unit New
Product Overview

Sturdy, durable, OE standard air shock absorber core (strut only) for Mercedes-Benz 253 4WD front left position (strut only, without air spring).

Vehicle Application Mercedes-Benz GLC (X253 / C253) 4WD Versions
Installation Position Front Left (Vehicle Left Side, Driver's Side on LHD Vehicles)
Component Type Shock Absorber Core / Strut Only (Without Air Spring, Must Be Used with Original or New Air Spring)
Product Description

This air shock absorber core (strut) is designed for the front air suspension system of Mercedes-Benz 253 chassis 4WD models, specifically for the front left (driver's side) position. This product is a strut-only component and does not include an air spring. It is suitable for repair scenarios where the original front air spring is still fully functional but the strut damping has degraded or failed.

This strut performs the front axle cushioning and stabilization tasks while also accommodating the additional load from the driver's side long-term weight. Through an internal hydraulic valve system, it precisely controls suspension compression and rebound rates, absorbs road impact energy transmitted through the front wheel, and suppresses the vehicle's forward dive tendency during braking as well as rearward squat during acceleration.

The front left strut is located on the driver's side and, on 4WD versions, must also handle the additional weight from the drive half-shaft and differential. This product features damping calibration specifically matched to the load characteristics of the 4WD front left axle. It is manufactured to original equipment structural dimensions, with piston rod diameter, strut body length, lower fork mounting bracket dimensions, and top fixing thread specifications all consistent with original factory specifications, allowing direct replacement without any modifications.

Key Features
  • Independent Strut (No Air Spring): Specifically designed for repair scenarios where the air spring is intact and only the strut has failed, reducing the cost of complete assembly replacement
  • Position Specific: Designed specifically for the front left (driver's side) position; damping characteristics are symmetrical between left and right but side swapping is not permitted
  • Compact Design: Body diameter and mounting point height are adapted to the compact suspension layout of the 253 chassis
  • Driver Side Optimized: Damping is optimized for the driver's side long-term load, maintaining balanced left-right driving feel
  • Factory Verified: Each unit undergoes damping force curve testing and high-pressure air tightness verification
Important Note: This product is suitable for Mercedes-Benz 253 chassis 4WD versions (GLC 260 4MATIC / GLC 300 4MATIC, etc.), model years 2015-2022. Differences exist between 2WD and 4WD versions of the front strut. Please verify the original OE part number or VIN code before purchasing. Vehicles with a "4MATIC" badge on the rear are 4WD versions.
Warehouse & Workshop

Keep dry, clean and handle with care.

Car W253 GLC 4WD Spring Shock Absorber Core Replacement For Mercedes Benz
Packing & Delivery

Professional, environmentally friendly, and efficient packaging services ensure the safety of your goods during transit.

Car W253 GLC 4WD Spring Shock Absorber Core Replacement For Mercedes Benz
Frequently Asked Questions
Q1: How can I tell whether the Mercedes-Benz 253 4WD front left strut is already damaged?
Common signs of damage include: a heavy "thumping" noise when the left front wheel goes over speed bumps, the front end noticeably dipping to the lower left side accompanied by slight vibration during braking, increased body roll due to insufficient left-side support when cornering right, and uneven saw-tooth wear on the left front tire. A simple self-check method: after stopping the vehicle, press down firmly on the left front fender and release quickly. If the body bounces up and down more than twice before stopping, the damping on the left side has significantly degraded.
Q2: Are the 253 4WD front left and front right struts interchangeable?
No, they are not interchangeable. Although similar in appearance, the left and right front struts on the 253 4WD differ in internal damping valve calibration to accommodate the additional weight distribution from the 4WD system as well as the driver's side long-term load. Forcibly swapping them will result in asymmetric support on both sides of the front axle during cornering, affecting handling stability.
Q3: After replacing the front left strut alone, is it necessary to also replace the right side?
Replacing in pairs is not mandatory; the left side can be replaced alone. However, because the 4WD front axle has a more complex structure and greater loads, the impact of left-right damping differences on handling is more noticeable than on 2WD versions. If the right side strut has been in service for a long time (over 60,000 km or 5+ years), it is recommended to replace both sides as a pair.
Q4: After replacing the strut, the instrument panel shows an "Air Suspension System Malfunction" warning, but the vehicle drives normally. What is the cause?
This situation is usually not a problem with the strut itself, but rather the air suspension system has not been reset after installation. After replacing front suspension components on a Mercedes-Benz 253, a diagnostic tool (such as XENTRY or a compatible device) is required to perform "level calibration" and "component learning" on the air suspension system.
Q5: Is the 253 4WD front left strut suitable for the 2WD GLC?
No, it is not interchangeable. The 2WD front axle is lighter. The 4WD strut has stiffer damping; installing it on a 2WD vehicle will result in a noticeably stiffer left side, strong bump feel, and reduced comfort. Before purchasing, confirm whether the vehicle has a "4MATIC" badge on the rear.
Q6: Are the X253 and C253 front left struts interchangeable?
Yes, they are interchangeable. The front axle suspension structure of the X253 (standard wheelbase GLC) and C253 (GLC Coupe) is completely identical. The strut mounting dimensions, piston rod diameter, and damping characteristics are all the same, making them interchangeable.
Q7: What accessories are recommended to replace at the same time as the front left strut?
It is recommended to replace the following accessories simultaneously: the front strut dust boot (if damaged, dirt can enter and damage the oil seal), the upper bump stop (may harden or crumble after long-term compression), and the top nut securing the piston rod (the original is a self-locking nut, which loses locking force after removal).
Q8: After replacing the strut, the left front suspension feels bumpier than before. Is this normal?
Yes, this is normal. Over long-term use, the damping oil inside the old strut gradually degrades and damping force decreases. The driver has become accustomed to the softer suspension feel. After the new strut restores the original factory damping level, the road feel becomes more noticeable.
Q9: There is a "creaking" or "squeaking" noise from the left front wheel area while driving after strut replacement. What is the cause?
This type of noise requires special attention on 4WD versions. Common causes include: 1) The top nut of the strut is not tightened to the specified torque (typically 60-70 Nm), causing relative movement between the strut and the body strut tower; 2) The dust boot is not installed properly and is rubbing against the strut body; 3) The left front stabilizer bar link ball joint is aged, producing noise when working with the new strut.
Q10: Is a wheel alignment (chassis angle calibration) necessary after replacing the 253 4WD front left strut?
It is strongly recommended. The 253 chassis GLC front suspension is a double-wishbone design. The 4WD front axle structure is more complex than the 2WD version, and removing the strut involves more connecting components, which will affect front wheel alignment parameters after installation.
Q11: Are the 253 4WD front strut and rear strut interchangeable?
Absolutely not. The front and rear struts have fundamental differences in body length, piston rod diameter, mounting method, and damping valve tuning. The 4WD front strut must withstand multiple loads from steering, braking, and power transmission, with design strength far higher than the rear strut.
Q12: Is the 253 4WD front left strut suitable for the later generation X254 GLC?
No, it is not suitable. The X254 is the next-generation GLC launched in 2022, with a completely different chassis structure, suspension geometry, and strut mounting dimensions. Parts are not interchangeable with the X253.
Send your message to this supplier
Send Now

Car W253 GLC 4WD Spring Shock Absorber Core Replacement For Mercedes Benz

Ask Latest Price
Watch Video
Product Detail
Brand Name :
FHD
Model Number :
Mercedes Benz 253 4WD
Certification :
ISO 9001
Place of Origin :
China
MOQ :
1 pc
Price :
Negotiable
Contact Supplier
video
Car W253 GLC 4WD Spring Shock Absorber Core Replacement For Mercedes Benz
Car W253 GLC 4WD Spring Shock Absorber Core Replacement For Mercedes Benz
Car W253 GLC 4WD Spring Shock Absorber Core Replacement For Mercedes Benz

Guangzhou Fenghui Automotive Parts Co., Ltd.

Verified Supplier
1 Years
guangdong, guangzhou
Since 2017
Business Type :
Manufacturer
Main Products :
Mercedes Benz Air Suspension, BMW Air Suspension, VW Air Suspension
Total Annual :
5000000-10000000
Employee Number :
50~100
Certification Level :
Verified Supplier
Discover similar products
View More

Find Similar Products By Category:

Supplier Homepage Products Spring Shock Absorber
MachineU China Products Tools & Hardware Hardware Springs
Contact Supplier
Submit Requirement