Original Huawei AP4050DN-HD indoor dual band wireless LAN access point with built-in intelligent high-density antenna
AP4050DN-HD Access Point — Huawei products
AP4050DN-HD Access Point
Huawei AP4050DN-HD is a wireless access point that supports 802.11ac Wave 2, 2 x 2 MIMO, and two spatial streams. The AP4050DN-HD provides a rate of up to 1.267 Gbit/s. It uses built-in high-density smart antennas and is applicable to indoor high-density stadiums.
Huawei AP4030TN is a wireless access point in compliance with 802.11ac standards. It supports Software-Defined Radio (SDR) and uses a triple-radio frequency design with each radio frequency supporting 2 x 2 MIMO and two spatial streams. The AP4030TN provides a rate of up to 2.6 Gbit/s and is applicable to environments such as eClassroom, high-density venues, shopping malls, and supermarkets.Embedded smart antennas, purpose-built for high-density scenarios, reduce construction costs and mitigate interference between APs
- Dual Ethernet interfaces support link aggregation and traffic load balancing to ensure link reliability
- PoE OUT is supported, saving costs in switch ports by 50%
- Cloud-based AP management using the Agile Controller-Cloud Manager
AP4050DN-HD Basic specifications |
Item | Description |
Physical specifications | Dimensions (H x W x D) | 65 mm x 334 mm x 240 mm |
Weight | 1.5 kg |
System memory | * 256 MB DDR3L * 64 MB NOR FLASH |
Power specifications | Power input | * DC: 12 V ± 10% * PoE power supply: in compliance with IEEE 802.3af/at |
Maximum power consumption | * 11.8 W (in 802.3af PoE or DC mode) * 13.9 W (in 802.3at PoE mode, excluding the output power of the PoE_OUT port) NOTE:The actual maximum power consumption depends on local laws and regulations. |
Environment specifications | Operating temperature | * -60 m to +1800 m: -10°C to +50°C * 1800 m to 5000 m: Temperature decreases by 1°C every time the altitude increases 300 m. |
Storage temperature | -40°C to +70°C |
Operating humidity | 5% to 95% (non-condensing) |
IP rating | IP41 |
Atmospheric pressure | 53 kPa to 106 kPa |
AP4050DN-HD Radio specifications |
Item | Description |
Antenna type | Built-in dual-band directional antenna (beamwidth: 30 degrees) |
Antenna gain | * 2.4 GHz: 13 dBi * 5 GHz: 10 dBi |
Maximum number of users | Fit AP: ≤ 512 Fat AP: ≤ 512 Cloud AP: ≤ 512 NOTE:The actual number of users varies according to the environment. |
Maximum number of VAPs for each radio | 16 |
Maximum transmit power | * 2.4 GHz: 22 dBm (combined power) * 5 GHz: 22 dBm (combined power) NOTE:The actual transmit power depends on local laws and regulations. |
Maximum number of non-overlapping channels | 2.4 GHz (2.412 GHz to 2.472 GHz) * 802.11b/g * 20 MHz: 3 * 802.11n * 20 MHz: 3 * 40 MHz: 1 | 5 GHz (5.18 GHz to 5.825 GHz) * 802.11a * 20 MHz: 13 * 802.11n * 20 MHz: 13 * 40 MHz: 6 * 802.11ac * 20 MHz: 13 * 40 MHz: 6 * 80 MHz: 3 | NOTE:The table uses the number of non-overlapping channels supported by China as an example. The number of non-overlapping channels varies in different countries. For details, see the Country Codes & Channels Compliance. NOTICE:If the AP is delivered to the USA, pay attention to the following on channel and frequency band usage: 1. The country code of the AP is fixed. 2. High power radars working at frequencies in the range of 5.25 GHz to 5.35 GHz, 5.47 GHz to 5.6 GHz, and 5.65 GHz to 5.725 GHz can interfere with or even damage APs working at the same frequency. |
Channel rate supported | * 802.11b: 1, 2, 5.5, and 11 Mbit/s * 802.11a/g: 6, 9, 12, 18, 24, 36, 48, and 54 Mbit/s * 802.11n: 6.5 to 400 Mbit/s * 802.11ac Wave 2: 6.5 to 867 Mbit/s |



