Miyachi Welding Power Commutator Hot Stacking Machine
The vertical mechanical motion of the machine is driven by the cylinder; and the auxiliary electrode is driven by the linear bearing. It can work easy and has good contact with commutator and without damage to the commutator.
(1)Application The machine is used for the starter of cars and motorcycle, DC motors, power tool motors, household appliances motors and series motors.
(2)Specification
Voltage
230V
Rated frequency
50-60Hz
Rated power
25KVA
Wire diameter
0.06-1.6 mm
Armature OD
0-100mm
Commutator OD
0-60mm
Stack length
0-350mm
Air source
0.3~0.5Mp
Cooling method
Water cooling and air cooling
(3)Operation 1)Connect machine to air source and power supply. 2)Switch the buttonto Miyachi. 3)Turn on machine power switch. 4)Switch the two buttons under the touch screen to "Auto" and "Run" . 5)Switch the rough set to 2 and the accurate set to 8. 6) Power on Miyachi. 7) Press "Stop" button. Then press the "Start" button to begin fusing.
Product tags
Send your message to this supplier
Send Now
Submission successful!
AC Type Commutator Spot Welding Machine Hot-Stacking Machine