6 Frequency Navigation Satellite Deception Equipment BDS-B1, GPS-L1/L2/L5, GLONASS-L1, Galileo-E1
Product Comparison
| Item |
Product 1 |
Product 2 |
Product 3 |
| Model |
TTSK-AY-6 |
TTSK-AY-13 |
TTSK-AY-22 |
| Frequency |
BDS-B1, GPS-L1/L2/L5, GLONASS-L1, Galileo-E1 |
GPS-L1C/A L2/L5, BDS-B1I/B1C/B2I/B3I, GLONASS-L1/L2/L3, Galileo-E1/E5a/E6 |
GPS-L1C/A L1C/L2/L5, BDS-B1I/B1C/B2I/B2a/B2b/B3I, GLONASS-L1/L2/L3, Galileo-E1B/E1C/E5a/E5b/E6C, QZSS-L1C/A L1C/L5, IRNSS-L5 |
Technical Specifications
Deception Distance
5km:5W, 10km:20W, 20km:50W
Attenuation Power Adjustment Range
80dB, minimum resolution 1dB
Power-on Startup Time
60s
Navigation Satellite Signal Synchronization Time
<180s
Input Voltage
AC 110-300V
Dimensions
430*370*175mm (without antenna)
Weight
<20kg
Operating Temperature
-40℃-50℃
Storage Temperature
-40℃-70℃
Protection Rating
IP65
Key Functions
- Supports signal reception and simulated transmission from the four major global navigation satellite systems and commonly used navigation frequencies in Japan and India
- Can perform navigation deception on UAVs that rely on satellite navigation and positioning systems, achieving objectives such as forced landing, heading guidance, takeoff prohibition, and navigation satellite signal interference
- Supports external direction finding modules to identify target azimuth and use heading guidance functions to control the target UAV's horizontal forward, backward, left, and right movements
- Supports external command control of arbitrary navigation signal combinations for transmission
- Supports setting arbitrary position coordinates (longitude, latitude, altitude) via external commands, and can also use built-in fixed coordinates
- Supports setting simulated parameters such as signal delay, motion speed, and acceleration via external commands
- Supports setting preset trajectories such as linear motion and circular motion via external commands
- Supports externally added motion trajectories; the module calculates and outputs the corresponding navigation satellite signals based on the input information
- Supports real-time ephemeris mode and permanent ephemeris mode
- Supports satellite navigation signal suppression and interference output
- Provides a network secondary development control interface