Advanced LiFePO4 lithium battery designed as a direct replacement for lead acid batteries, featuring extended charge time capabilities and high capacity performance.
| No | Item | Parameter | Remark |
|---|---|---|---|
| 1 | Rating Voltage | 12.8V | |
| 2 | Capacity | 230Ah | 0.5C discharge after full charge |
| Minimum Capacity | 220AH | ||
| 3 | Charge Voltage | 14.6V±0.05V | |
| 4 | Impedance | 10mΩ(Max) | |
| 5 | Charging Mode | C.C/C.V. | Constant Current/Constant Voltage |
| 6 | Charging Method | Standard Charging | Charging Current 30A |
| Fast Charging | Charging Current 100A | ||
| 7 | Charging Time | Standard Charging | 8.5 Hours |
| Fast Charging | 2.8 Hours | ||
| 9 | Overcharge Voltage | 3.65±0.05V | |
| 10 | Over Discharge Cut Off Voltage | 2.2V±0.1V | |
| 11 | Over Current | 250-400A | |
| 12 | Short Circuit | ||
| 13 | Operating Consumption Current | 50uA(MAX) | |
| 14 | Operating Temperature | Charging: 0~45℃ Discharging: -10~60℃ |
|
| 15 | Storage Temperature | -10℃-40℃ Recommend (25±5℃) |
Storage capacity should be 40%~50% full charge capacity |
| 16 | NTC Resistor | / | |
| 17 | ESD Test | ±4KV | |
| 18 | Discharge current | ≤200A | |
| 19 | The factory voltage | 12.8-13.6V | The open circuit state |
| 20 | Weight Approx | 20.8KG |
The battery storage shall be in a clean and dry ventilation room at the temperature of -5~35℃ and shall be kept away from fire or heat sources while avoiding contact with corrosive elements.