High Stability LiFePO4 Lithium Battery Replacement Lead Acid 12V 100Ah Long Service Life
High-performance lithium iron phosphate battery designed as a direct replacement for lead-acid batteries, offering superior stability and extended service life.
Technical Specifications
| No |
Item |
Parameter |
Remark |
| 1 |
Rating Voltage |
12.8V |
|
| 2 |
Capacity |
100Ah |
0.2C discharge after full charge |
| 3 |
Charge Voltage |
14.6V±0.05V |
|
| 4 |
Impedance |
15mΩ(Max) |
|
| 5 |
Charging Mode |
C.C/C.V. |
Constant Current / Constant Voltage |
| 6 |
Charging Method |
Standard Charging: 15A Fast Charging: 50A |
|
| 7 |
Charging Time |
Standard: 8 Hours Fast: 2.6 Hours |
|
| 9 |
Overcharge Voltage |
3.75±0.05V |
|
| 10 |
Over Discharge Cut Off Voltage |
2.5V±0.1V |
|
| 11 |
Over Current |
300-400A |
|
| 12 |
Short Circuit |
|
|
| 13 |
Operating Consumption Current |
50uA(MAX) |
|
| 14 |
Operating Temperature |
Charging: 0~45℃ Discharging: -10~60℃ |
|
| 15 |
Storage Temperature |
-10℃-40℃ Recommend(25±5℃) |
Storage capacity should be 40%~50% full charge capacity |
| 16 |
NTC Resistor |
/ |
|
| 17 |
ESD Test |
±4KV |
|
| 18 |
Discharge Current |
≤100A |
|
| 19 |
Factory Voltage |
12.8-13.6V |
The open circuit state |
| 20 |
Weight |
Approx 10 kg |
|
Storage Guidelines
The battery storage shall be in a clean, dry, and well-ventilated room at temperatures between -5℃ to 35℃. Keep batteries away from fire, heat sources, and corrosive elements.
Batteries should be charged every 3 months during storage. Follow the "first come, first use" principle for both stored cells and batteries in delivery.
The battery storage period is 24 months from warehouse entry. Batteries exceeding this period must undergo thorough inspection. Only applicable batteries may be dispatched to purchasers; non-applicable units shall be rechecked, with the purchaser retaining the right to dispose of defective batteries.