MachineU > China Products > Home Appliance
Thick Film Resistors Venkel CR0402-16W-2402FT with Wrap Around Matte Tin Termination and Alumina Substrate
Thick Film Resistors Venkel CR0402-16W-2402FT with Wrap Around Matte Tin Termination and Alumina Substrate
Specifications
Power(Watts) :
62.5mW
Resistance :
24kΩ
Operating Temperature :
-55℃~+155℃
Type :
Thick Film Resistor
Temperature Coefficient :
±100ppm/℃
Tolerance :
±1%
Description :
62.5mW 24kΩ Thick Film Resistor ±100ppm/℃ ±1% 0402 Chip Resistor - Surface Mount RoHS
Mfr. Part # :
CR0402-16W-2402FT
Model Number :
CR0402-16W-2402FT
Package :
0402
Description

Product Overview

The Venkel CR Series General Purpose Thick Film Resistors are designed for a wide range of applications, offering stable performance over temperature and good power dissipation capabilities. These resistors feature an alumina substrate and a 100% matte Tin over Nickel termination for excellent solderability, with some values available for conductive epoxy applications, making them suitable for MRI environments. They are available in various sizes from 01005 to 2512, with TCR as low as 100ppm.

Product Attributes

  • Brand: Venkel
  • Series: CR Series
  • Type: General Purpose Thick Film Resistors
  • Substrate Material: Alumina
  • Termination Finish: 100% matte Tin (Sn) over Nickel with wrap-around termination
  • Optional Termination: Palladium Silver (PdAg)

Technical Specifications

Size Power Rating at 70C (W) Max. Working Voltage (V) Max. Overload Voltage (V) Operating Temp. Range (C) Zero Ohm (Jumper) Current Rating (A) Zero Ohm (Jumper) Resistance (m max) TCR (ppm/C)
01005 0.03W (1/32W) PR or 15 30 -55 to +125 0.5 50 100, 250, 300
0201 0.05W (1/20W) PR or 25 50 -55 to +125 0.5 50 100, 250, 300
0402 0.063W (1/16W) PR or 50 100 -55 to +155 1 50 100, 200, 250, 300
0603 0.10W (1/10W) PR or 75 150 -55 to +155 1 50 100, 200, 250, 300
0805 0.063W (1/16W) PR or 150 300 -55 to +155 2 50 100, 200, 250, 300, 350
1206 0.10W (1/10W) PR or 150 300 -55 to +155 2 50 100, 200, 250, 300, 350
1210 0.10W (1/10W) PR or 200 400 -55 to +155 2.5 50 100, 200, 250, 300
2010 0.25W (1/4W) PR or 200 400 -55 to +155 3.5 50 100, 200, 250, 300
2512 (1W) 0.50W (1/2W) PR or 200 500 -55 to +155 4 50 100, 200, 250, 300
2512 (2W) 1.0W PR or 200 500 -55 to +155 4 50 100, 200, 250, 300
Size L (mm) W (mm) T (mm) C1 (mm) C2 (mm)
01005 0.4 0.02 0.2 0.02 0.13 0.02 0.08 0.03 0.08 0.03
0201 0.6 0.05 0.3 0.02 0.25 0.05 0.50 0.20 0.15 0.05
0402 1.0 0.05 0.5 0.05 0.35 0.05 0.2 0.1 0.2 0.1
0603 1.6 0.1 0.8 0.1 0.45 0.1 0.30 0.15 0.30 0.15
0805 2.0 0.15 1.25 0.15 0.45 0.15 0.35 0.15 0.35 0.15
1206 3.2 0.15 1.6 0.15 0.56 0.15 0.50 0.20 0.50 0.20
1210 3.2 0.15 2.50 0.15 0.56 0.15 0.50 0.20 0.50 0.20
2010 5.0 0.15 2.50 0.15 0.56 0.15 0.65 0.25 0.60 0.20
2512 (1W) 6.3 0.15 3.2 0.15 0.56 0.15 0.65 0.25 0.60 0.20
2512 (2W) 6.3 0.15 3.2 0.15 0.60 0.20 0.60 0.20 0.50 0.20

Part Number Structure:

CR [Size] - [Power Rating]W - [Resistance Value] [Tolerance] [Termination] [Packaging]

  • Series: CR
  • Size Codes: 01005, 0201, 0402, 0603, 0805, 1206, 1210, 2010, 2512
  • Power Rating Codes: 32W (0.031W), 20W (0.05W), 16W (0.063W), 10W (0.10W), 8W (0.125W), 4W (0.25W), 2W (0.50W), 1W (1W), 2W (2W)
  • Resistance Note: 3-digit (J tol.) for values like 2R2 (2.2), 103 (10K). 4-digit (D & F tol.) for values like 10R2 (10.2), 1002 (10K). Jumper for zero ohm value.
  • Tolerance Codes: D (0.5%), F (1%), J (5%). No tolerance specified for zero ohm.
  • Termination Codes: Blank for standard; P for Palladium Silver (PdAg).
  • Packaging Codes: T for Tape & Reel. Optional Reel Identifier: Blank for standard reel size, "-13" for 13" Reel.

Marking Code Information:

  • 1% E-24 values (0603 and larger) typically marked with standard 3-digit code.
  • 1% E-96 values (0805 and larger) may or may not be marked with standard 4-digit code.
  • 5% E-24 values (0603 and larger) marked with standard 3-digit code.
  • 0603, 1% E-96 values marked with standard 3-digit alpha-numeric code.
  • 01005, 0201, and 0402 cannot be marked.
  • 5% E-24 values (1210~2512) may be marked with 4-digit code.
  • E-192 values not typically marked.
  • E96 resistance values use a two-digit number code and a letter multiplier (A-Z) for marking.

Derating Curve:

Derating applies based on ambient temperature. 100% rated power is at 70C for 01005 & 0201 sizes, and at 70C for 0402 to 2512 sizes.

Environmental Characteristics:

Test Item Test Method Requirement (1% and Below) Requirement (5%) Requirement (Jumper)
Temperature Coefficient of Resistance (T.C.R.) JIS-C-5201-1 4.8 / IEC-60115-1 4.8 As Spec. As Spec. -
Short Time Overload JIS-C-5201-1 4.13 / IEC-60115-1 4.13 (1.0%+0.05) (2.0%+0.05) <50m
Insulation Resistance JIS-C-5201-1 4.6 / IEC-60115-1 4.6 10G 10G -
Endurance JIS-C-5201-1 4.25 / IEC-60115-1 4.25.1 (1.0%+0.10) (2.0%+0.10) <100m
Damp Heat with Load JIS-C-5201-1 4.24 / IEC-60115-1 4.24 (1.0%+0.10) (2.0%+0.10) <100m
Dry Heat JIS-C-5201-1 4.23 / IEC-60115-1 4.23.2 (1.0%+0.05) (1.5%+0.10) <50m
Bending Strength JIS-C-5201-1 4.33 / IEC-60115-1 4.33 (1.0%+0.05) (1.0%+0.05) <50m
Solderability JIS-C-5201-1 4.17 / IEC-60115-1 4.17 95% min. coverage 95% min. coverage -
Resistance to Soldering Heat JIS-C-5201-1 4.18 / IEC-60115-1 4.18 (0.5%+0.05) (1.0%+0.05) <50m
Voltage Proof JIS-C-5201-1 4.7 / IEC-60115-1 4.7 No breakdown or flashover No breakdown or flashover -
Leaching JIS-C-5201-1 4.18 / IEC-60068-2-58 8.2.1 Individual 5%, Total 10% Individual 5%, Total 10% -
Rapid Change of Temperature JIS-C-5201-1 4.19 / IEC-60115-1 4.19 (0.5%+0.05) (1.0%+0.05) <50m

Tape & Reel Specifications:

Size Tape Width (mm) Pitch (mm) Pocket Depth (mm) Pocket Width (mm) Carrier Width (mm) Reel Diameter (mm)
01005 8.0 0.2 4.0 0.1 1.5 + 0.1-0 0.45 0.05 0.25 0.05 180 2.0
0201 8.0 0.2 4.0 0.1 1.5 + 0.1-0 0.7 0.08 0.4 0.08 180 2.0
0402 8.0 0.2 4.0 0.1 1.5 + 0.1-0 1.15 0.1 0.65 0.1 180 2.0
0603 8.0 0.2 4.0 0.1 1.5 + 0.1-0 1.9 0.1 1.1 0.1 180 2.0
0805 8.0 0.2 4.0 0.1 1.5 + 0.1-0 2.4 0.1 1.65 0.1 180 2.0
1206 8.0 0.2 4.0 0.1 1.5 + 0.1-0 3.5 0.2 1.9 0.1 180 2.0
1210 8.0 0.2 4.0 0.1 1.5 + 0.1-0 3.5 0.1 2.8 0.2 180 2.0
2010 12.0 0.3 4.0 0.1 1.5 + 0.1-0 5.4 0.2 2.9 0.2 180 2.0
2512 12.0 0.3 4.0 0.1 1.5 + 0.1-0 6.8 0.2 3.6 0.2 180 2.0

Note: Minimum of 30 empty pockets at the beginning of reel, 65 minimum at the end. Peel back force: 0.1N 1.3N; Peel back angle: 165 180.


2404091323_Venkel-CR0402-16W-2402FT_C4057324.pdf

Send your message to this supplier
Send Now

Thick Film Resistors Venkel CR0402-16W-2402FT with Wrap Around Matte Tin Termination and Alumina Substrate

Ask Latest Price
Product Detail
Power(Watts) :
62.5mW
Resistance :
24kΩ
Operating Temperature :
-55℃~+155℃
Type :
Thick Film Resistor
Temperature Coefficient :
±100ppm/℃
Tolerance :
±1%
Contact Supplier
Thick Film Resistors Venkel CR0402-16W-2402FT with Wrap Around Matte Tin Termination and Alumina Substrate

Beijing Silk Road Enterprise Management Services Co., Ltd.

Verified Supplier
1 Years
beijing, beijing
Since 2009
Business Type :
Manufacturer, Distributor/Wholesaler, Agent, Importer
Main Products :
Crystals, Delay Lines, Aluminum - Polymer Capacitors
Employee Number :
>>300
Certification Level :
Verified Supplier
Discover similar products
View More

Find Similar Products By Category:

Supplier Homepage Products Chip Resistor - Surface Mount
MachineU China Products Home Appliance
Contact Supplier
Submit Requirement