0.55mm SGCC PPGI Steel Coil with PE Coating for Roofing and Building Panels

１．Product Overview

0.55mm SGCC PPGI Steel Coil is a pre-painted galvanized steel coil designed for roofing panels, building cladding, furniture components, vehicle parts, and industrial fabrication. The product combines a galvanized substrate with a PE paint system to provide surface protection, appearance consistency, and processing efficiency.

The pre-painted finish reduces secondary painting requirements and supports roll forming, bending, profiling, and panel manufacturing operations.

２．Technical Solution

The product uses SGCC galvanized steel substrate with a zinc coating of 40g/m². The coating system consists of 15 Micron Polyester + 5 Micron Primer on the top surface and 7 Micron + 5 Micron Primer on the reverse side.

The PE coating system provides decorative appearance, surface durability, and protection against normal atmospheric exposure. The galvanized substrate supplies basic corrosion resistance while maintaining formability for roofing and construction applications.

３．Specifications

４．Application

• Roofing sheet manufacturing
• Building wall panels
• Warehouse construction
• Airport buildings
• Storage facilities
• Vehicle manufacturing components
• Furniture panels
• Electrical equipment housings
• Industrial fabrication
• General construction projects

５．Processing

• Roll forming
• Cut-to-length processing
• Slitting
• Bending
• Profiling
• Panel fabrication
• Roofing sheet production
• Structural component manufacturing

６．Advantages

• 0.55mm thickness provides a balance between strength and forming performance.
• SGCC substrate supports stable processing and panel fabrication.
• PE coating provides uniform appearance and good weather resistance for general building applications.
• 1250mm width is suitable for roofing sheet and panel production.
• Pre-painted surface reduces additional painting operations after fabrication.
• Galvanized substrate improves corrosion resistance compared with uncoated steel.

７．How to Choose

• Choose 0.55mm thickness for standard roofing and wall panel applications.
• Select PE coating for general outdoor and indoor construction environments.
• Confirm zinc coating requirements according to expected service conditions.
• Verify panel profile design and roll-forming compatibility before production.
• Consider higher coating systems when projects require enhanced weather resistance.

８．FAQ

Q1．What is the steel grade of this product?

The product uses SGCC galvanized steel substrate.

Q2．What is the thickness?

The thickness is 0.55mm.

Q3．What paint system is used?

The product uses a PE coating system with polyester top coating and primer.

Q4．What applications is this product suitable for?

It is suitable for roofing sheets, wall panels, building cladding, furniture panels, vehicle parts, and industrial fabrication.

Q5．What is the coil width?

The width is 1250mm.