3,250 m²/h Cleaning Efficiency: Designed for efficient daily cleaning in commercial and industrial facilities.
530 mm Scrubbing Width: Provides efficient floor coverage while remaining suitable for narrower commercial areas.
830 mm Squeegee Width: The wide rear squeegee improves wastewater recovery during straight-line cleaning and turning.
3–4.5 Hours Continuous Operation: The 24 V battery system supports extended cleaning sessions between charges.
42 L Fresh-Water Tank: Provides sufficient cleaning-solution capacity for medium-sized floor areas.
48 L Wastewater Tank: The larger recovery tank helps reduce interruptions during cleaning.
550 W Brush Motor: Drives the 530 mm brush disc for routine and more demanding hard-floor cleaning.
11 kPa Vacuum Suction: Helps recover dirty water and supports faster floor drying after scrubbing.
Up to 45 kg Scrubbing Pressure: Provides 30 kg of standard brush pressure plus 15 kg from the pressurization device.
Compact Machine Dimensions: Measures 1,270 × 560 × 1,068 mm for easier operation, transport and storage.
91 kg Machine Weight: The compact design makes transportation and daily handling more convenient.


















The K1-BT is suitable for small-to-medium commercial and industrial facilities. It has a rated cleaning efficiency of up to 3,250 m²/h and can be used in warehouses, supermarkets, workshops, hospitals, schools, hotels and parking facilities.
The theoretical cleaning coverage is approximately 9,750–14,625 m² per charge. This calculation is based on the rated cleaning efficiency of 3,250 m²/h and a continuous working time of 3–4.5 hours. Actual coverage varies according to floor conditions, obstacles, turning frequency, water refilling and operating practices.
The K1-BT has a 530 mm brush disc and an 830 mm squeegee. The 530 mm scrubbing path provides efficient floor coverage, while the wider squeegee helps recover wastewater during straight-line cleaning and turning.
Yes, the K1-BT provides up to 45 kg of brush pressure. Standard scrubbing pressure is 30 kg, and the pressurization device adds another 15 kg when additional cleaning pressure is required. Cleaning results also depend on the selected brush, cleaning pad and detergent.
The K1-BT is equipped with a 550 W brush motor. The motor drives the 530 mm brush disc and works with the pressurization system for routine and more demanding hard-floor cleaning.
The K1-BT has a 42 L fresh-water tank and a 48 L wastewater tank. The larger recovery tank helps reduce the risk of reaching capacity before the fresh-water supply is used.
Yes, the K1-BT scrubs and recovers dirty water in one pass. Its 830 mm squeegee and 11 kPa vacuum suction help collect wastewater. Final drying performance depends on squeegee adjustment, blade condition, floor flatness and operating speed.
The K1-BT is suitable for common sealed hard floors when fitted with the correct brush or cleaning pad. Typical applications include ceramic tile, terrazzo, marble, vinyl, epoxy flooring and sealed concrete.
The machine body is 560 mm wide, but operating clearance must account for the 830 mm squeegee. The complete machine dimensions are 1,270 × 560 × 1,068 mm. Buyers should measure the narrowest doorway, aisle and turning area before ordering.
The K1-BT weighs 91 kg. A suitable loading ramp or lifting equipment is recommended when transporting the machine between job sites.
The K1-BT operates on a 24 V battery system and provides approximately 3–4.5 hours of continuous working time. Battery capacity, battery chemistry, charger input voltage, charging time and plug type should be confirmed before ordering.
Buyers should confirm the battery, charger, plug standard, brush configuration and spare-parts package. Recommended spare parts include squeegee blades, a replacement brush or pad holder, cleaning pads, water filters, seals and commonly used electrical components.