The T1 is best suited to small and medium commercial areas that require a compact walk-behind machine. It has a 520mm cleaning width and a rated efficiency of up to 1,200m²/h. Typical applications can include shops, offices, restaurants, schools, healthcare facilities and restricted warehouse areas, subject to the floor condition.

The theoretical coverage is approximately 1,800–2,400m² per charge. This estimate is calculated from the rated efficiency of 1,200m²/h and the specified working time of 1.5–2 hours. Actual coverage will be lower when the operator makes frequent turns, refills the tank or cleans heavily soiled floors.

Yes, the 520mm cleaning path balances productivity with maneuverability. The machine body measures 518mm wide, allowing it to work in comparatively restricted spaces. Buyers should still measure doorways, elevators, aisles and storage entrances before confirming an order.

The T1 uses two 160W brush motors, providing 320W of combined rated brush power. The dual-motor configuration supports consistent mechanical scrubbing across the 520mm cleaning path. Brush type and pad selection should be matched to the floor material and soil level.

The T1 uses a 6L fresh-water tank and a 9L wastewater tank, so it is intended for compact-area cleaning rather than uninterrupted large-site operation. Refilling frequency depends on the water-flow setting, floor condition and cleaning method. Buyers with long uninterrupted routes should compare the tank capacity with their planned cleaning schedule.

The supplied specification does not state the squeegee width or vacuum-motor rating, so drying performance should be confirmed before purchase. Ask the supplier to provide the squeegee configuration, vacuum-motor power, water-recovery test results and replacement rubber-blade specifications when immediate floor drying is required.

The confirmed electrical specification is a 24V battery system. Battery capacity, battery chemistry and charging time are not stated in the supplied specifications. Buyers should confirm whether the quotation includes lead-acid or lithium batteries, the amp-hour rating, charger type and local input voltage.

The T1 has a compact footprint but requires planned handling because it weighs 65kg. Its dimensions are 518 × 410 × 1,208mm. Confirm vehicle access, loading method, elevator capacity, storage height and whether the handle can be folded or removed before arranging transportation.

The T1 should be fitted with the correct brush or pad for each hard-floor surface. Before ordering, confirm compatibility with the intended material, such as tile, sealed concrete, terrazzo, vinyl or stone. Sensitive and coated floors should be tested in a small area with the recommended pad and cleaning chemical.

Confirm the complete electrical, water-recovery, consumable and after-sales configuration in writing. The purchase specification should include battery capacity and chemistry, charger voltage and plug, squeegee width, vacuum-motor power, brush or pad type, spare rubber blades, warranty coverage, packaging dimensions, gross weight and replacement-parts availability.