The XD1-2 is best suited to small and medium facilities with narrow or divided cleaning areas. It has a 420mm cleaning width and a rated efficiency of up to 1,000m²/h. Potential applications include offices, shops, restaurants, schools, clinics, hotels and restricted warehouse areas.

The theoretical coverage is approximately 2,000–2,500m² per charge. This estimate is based on the rated efficiency of 1,000m²/h and the specified working time of 2–2.5 hours. Actual coverage will vary with operator speed, turning frequency, floor condition, water servicing and battery condition.

Yes, its compact dimensions and 420mm cleaning path make it suitable for restricted commercial spaces. The machine measures 720 × 450 × 1,030mm. Buyers should measure doorways, elevators, checkout lanes, aisles and storage entrances before ordering.

Yes, the XD1-2 combines a 400W brush motor with 22kg of scrubbing pressure. This specification supports routine removal of tracked-in dirt and common commercial floor contamination. The correct brush or pad should be selected for the floor material and soil level.

The XD1-2 uses a 520mm squeegee and a 400W suction motor for wastewater recovery. The squeegee is 100mm wider than the 420mm cleaning path, helping collect water across the scrubbed area during normal operation. Recovery performance also depends on rubber-blade condition, floor flatness and machine adjustment.

The 13L fresh-water tank and 15L wastewater tank are designed for compact-area cleaning and may require servicing during longer routes. Actual refill frequency depends on water-flow settings, floor condition and cleaning speed. Buyers should compare the tank capacity with the intended route length and shift schedule.

The confirmed electrical specification is a 24V battery system with a stated working time of 2–2.5 hours. Battery capacity, chemistry and charging time are not stated in the supplied specifications. Confirm the amp-hour rating, lead-acid or lithium configuration, charger input voltage and plug type before ordering.

Yes, the 24kg machine is comparatively easy to handle, but safe loading equipment may still be required. Its dimensions are 720 × 450 × 1,030mm. Buyers should confirm whether the handle folds, whether the battery is removable and whether the machine fits the intended service vehicle or elevator.

The XD1-2 is intended for compatible hard floors when fitted with the correct brush or pad. Before purchase, confirm suitability for the intended tile, sealed concrete, terrazzo, vinyl or stone floor. Sensitive and coated surfaces should be tested in a small area using the recommended pad and cleaning chemical.

Confirm the battery, charger, consumables, packaging and after-sales configuration in writing. The purchase specification should include battery capacity and chemistry, charger voltage and plug, supplied brush or pad, spare squeegee blades, warranty terms, packaging dimensions, gross weight and replacement-parts availability.