The DC980 is designed for large commercial and industrial facilities with wide, relatively open floor areas. Its rated cleaning efficiency is up to 7,800m²/h. Typical applications can include factories, logistics centers, large warehouses, parking facilities, transportation terminals and distribution centers.

The theoretical maximum coverage is approximately 46,800–54,600m² per charge. This estimate is calculated from the rated efficiency of 7,800m²/h and the specified working time of 6–7 hours. Actual coverage will be lower because of turning, overlapping, tank servicing, floor condition and operating speed.

The supplied data indicates an 800–980mm scrubbing range, but the exact configuration should be confirmed before purchase. Because the machine lists two 500W brush motors plus an additional 200W motor, buyers should confirm the standard dual-brush width and whether the 980mm figure includes an auxiliary or extendable side brush.

The DC980 combines two 500W brush motors, an additional 200W motor and adjustable pressure of 38–54kg. This configuration is intended for commercial and industrial scrubbing. Actual results depend on brush or pad selection, chemical dilution, floor material, soil level and operating speed.

The DC980 uses a 1,300mm squeegee and a 500W suction motor for wastewater recovery. The wide recovery path is designed to collect water across the scrubbed area. Drying performance also depends on squeegee adjustment, rubber-blade condition, floor joints, surface flatness and machine speed.

Yes, the 160L fresh-water tank and 190L wastewater tank are designed to reduce servicing interruptions. The larger recovery tank provides additional capacity for collected water and foam. Actual servicing frequency depends on water-flow settings, soil level, route layout and operator speed.

The DC980 uses a 650W front-drive motor with a listed speed range of 0–7km/h. The powered drive reduces operator effort during long shifts. Buyers should also confirm the maximum working gradient, braking system, reverse speed and traction performance on wet ramps.

The confirmed specification is a 24V battery system with a stated working time of 6–7 hours. The supplied parameter sheet does not confirm a 480Ah capacity or battery chemistry. Buyers should verify the amp-hour rating, lead-acid or lithium configuration, charging time, charger voltage and plug type before ordering.

The DC980 requires wide access routes because the machine and squeegee are both 1,300mm wide. Its complete dimensions are 1,550 × 1,300 × 1,250mm, and its weight is 420kg. Buyers should measure gates, doors, elevators, aisles, turning areas and storage entrances before confirming the purchase.

Confirm the complete brush, battery, charger, safety, consumable and shipping configuration in writing. The purchase specification should include the standard and extended scrubbing widths, auxiliary-brush function, battery capacity and chemistry, charger voltage and plug, maximum gradient, braking system, supplied brushes or pads, spare squeegee blades, packaging details and replacement-parts availability.