The K1 is suitable for small-to-medium commercial and industrial facilities. It delivers a rated cleaning efficiency of up to 2,500 m²/h and can be used in warehouses, supermarkets, workshops, hospitals, schools, hotels and parking facilities.

The theoretical cleaning coverage is approximately 7,500–10,000 m² per charge. This estimate is based on the rated cleaning efficiency of 2,500 m²/h and a continuous working time of 3–4 hours. Actual coverage varies according to floor conditions, obstacles, turning frequency, water refilling and operating practices.

The K1 has a 530 mm brush disc and an 830 mm squeegee. The 530 mm scrubbing path provides efficient floor coverage, while the wider squeegee helps collect wastewater during normal operation and turning.

Yes, the K1 provides up to 45 kg of brush pressure. Standard scrubbing pressure is 30 kg, and the pressurization device adds another 15 kg when additional cleaning pressure is required. Cleaning results also depend on the brush, cleaning pad and detergent selected.

The K1 is equipped with a 550 W brush motor. The motor drives a 530 mm brush disc and works with the pressurization system for routine and more demanding hard-floor cleaning.

The K1 has a 42 L fresh-water tank and a 48 L wastewater tank. The larger recovery tank helps reduce the risk of the wastewater tank reaching capacity before the fresh-water supply is used.

The K1 scrubs and recovers dirty water in one pass. Its 830 mm squeegee and 11 kPa vacuum suction help collect wastewater. Final drying performance depends on squeegee adjustment, blade condition, floor flatness and operating speed.

The K1 is suitable for common sealed hard-floor surfaces when fitted with the correct brush or cleaning pad. Typical applications include ceramic tile, terrazzo, marble, vinyl, epoxy flooring and sealed concrete. Brush hardness and detergent should be selected according to the floor material.

The machine body is 560 mm wide, but operating clearance must account for the 830 mm squeegee. The complete machine dimensions are 1,270 × 560 × 1,068 mm. Buyers should measure the narrowest doorway, aisle and turning area before ordering.

The K1 weighs 145 kg including the battery. A suitable loading ramp or lifting equipment is recommended when transporting the machine between job sites.

The K1 operates on a 24 V battery system. Battery capacity, battery chemistry, charger input voltage, charging time and plug type should be confirmed before ordering.

Buyers should confirm the battery, charger, plug standard, brush configuration and spare-parts package. Recommended spare parts include squeegee blades, one replacement brush or pad holder, cleaning pads, water filters, seals and commonly used electrical components.