The XD1-7 is best suited to small and medium commercial facilities that require more capacity than a compact mini scrubber. It has a 430mm cleaning width and a rated efficiency of up to 1,750m²/h. Potential applications include supermarkets, hotels, schools, hospitals, workshops, offices and divided warehouse areas.

The theoretical maximum coverage is approximately 5,250m² per charge. This figure is calculated from the rated efficiency of 1,750m²/h and the specified three-hour working time. Actual coverage will normally be lower because of turning, overlapping, water servicing, floor condition and operator speed.

Yes, but site access should be measured before ordering. The cleaning path is 430mm, while the complete machine measures 950 × 560 × 1,180mm. Buyers should check doorway width, elevator access, aisle clearance, turning space and storage entrances.

The XD1-7 uses a 450W brush motor for routine commercial hard-floor scrubbing. However, the supplied specification does not state the brush pressure. Buyers comparing heavy-soil performance should confirm the rated brush pressure, brush speed and available brush or pad options before purchase.

The XD1-7 combines a 550mm squeegee with a 500W suction motor for wastewater recovery. The squeegee is 120mm wider than the 430mm cleaning path, helping collect water across the scrubbed area. Actual recovery also depends on blade condition, squeegee adjustment, floor joints and surface flatness.

The 25L fresh-water tank and 30L wastewater tank provide more operating capacity than compact mini scrubbers. They are suitable for medium cleaning routes, although refill frequency depends on water-flow settings, soil level and operator speed. Buyers should compare the tank capacity with the planned shift and distance to the service area.

The confirmed specification is a 24V battery system with a stated working time of three hours. Battery capacity, chemistry and charging time are not included in the supplied data. Confirm the amp-hour rating, lead-acid or lithium configuration, charger input voltage, plug type and replacement-battery availability before ordering.

The XD1-7 requires planned loading because it weighs 96kg. Its dimensions are 950 × 560 × 1,180mm. A vehicle ramp, lift or other suitable handling method may be required. Confirm gross packed weight, packaging dimensions and whether the battery can be removed before arranging transport.

The XD1-7 is intended for compatible hard floors when fitted with the correct brush or pad. Confirm suitability for the intended tile, sealed concrete, terrazzo, vinyl or stone surface. Sensitive, polished and coated floors should be tested in a small area using the recommended pad and cleaning chemical.

Confirm the complete battery, brush, water-recovery, consumable and after-sales configuration in writing. The purchase specification should include battery capacity and chemistry, charger voltage and plug, brush pressure, supplied brush or pad, spare squeegee blades, warranty terms, packaging dimensions, gross weight and replacement-parts availability.