Come-M100 is designed and manufactured by Shenzhen Comelink Technology Co.,Ltd, designed for fulfilling FTTH (Fiber To The Home) and triple play service demand of fixed network operators. The product is based on the mature Gigabit GPON technology, which has high ratio of performance to price. It is highly reliable and easy to maintain, with guaranteed QOS for different service. And It is fully compliant with technical regulations such as ITU-T G.984.x and technical requirement of GPON Equipment from China Telecom.
| |
| |
| |
| |
| 1 x 10 / 100 / 1000m adaptive port (RJ45) |
Product features |
Comply with ITU-T g.984 standard |
It supports layer 2 switching of Ethernet services and line speed forwarding of uplink and downlink services |
Support frame filtering and suppression |
Support the standard 802.1Q VLAN function and VLAN conversion |
Support 2.6.3 IGMP snooping and the function of restoring factory parameters |
Support Ethernet port speed limit, loop detection and layer-2 isolation |
Support remote reset and restart functions |
Support status detection and fault reporting |
Support 4094 VLANs and power lightning protection |
Support dynamic bandwidth allocation and data encryption |
Support PPPoE, ipoe, bridge and other services |
Support QoS, including service flow classification, priority marking, queuing and scheduling, traffic shaping and traffic control |
Product Properties |
support wavelength division multiplexing technology, single fiber dual wave bidirectional transmission |
interface type: SC / APC | maximum spectral ratio: 1:128 |
rate: uplink 1.25gbps, downlink 2.5Gbps | receiving wavelength: 1490nm |
transmission wavelength: 1310nm | output optical power: - 1 ~ + 4dbm |
receiving sensitivity: < - 27dBm | The longest distance between OLT and ONU is 20km |
power supply: AC 200V | Humidity: 10 ~ 90% non condensing |
Operating temperature: 0 ° ~ 40 ℃ | Storage temperature: - 40 ° ~ 70 ° |
power consumption: < 6W | chassis specification: 86 * 86 * 32mm (length * width * height) |

