OUR ONU COMPLY WITH:
1. ITU-T g.984 standard
2. 802.11 n / B / g protocol standard
3. H.248, MGCP and SIP protocol standards
Port characteristics:
PON: Connect the OLT equipment at the source end through the optical fiber line.
Ethernet port: Connected to user side equipment through twisted pair network cable, lan 1 port speed is 10 / 100 / 1000 m, adaptive, lan 2 - lan 4 Port rate is 10 / 100 M adaptive.
Reset button: Restart the equipment; Press and hold for more than 3 seconds and the system will return to the factory default.
Led button: LED indicator on / off
Power switch: Power on / off
Power interface: Connected to external power supply.
OUR ONU SUPPORT: |
1. 4094 VLANs 2. data encryption 3. 2.6.3 IgM snooping 4. power failure alarm 5. GPON / EPON dual mode 6. power lightning protection 7. dynamic bandwidth allocation 8. frame filtering and suppression 9. remote reset and restart functions 10. status detection and fault reporting 11. PPPoE, ipoe, bridge and other services 12. the function of restoring factory parameters 13. the standard 802.1Q VLAN function and VLAN conversion 14. Ethernet port speed limit, loop detection and layer-2 isolation 15. layer 2 switching of Ethernet services and line speed forwarding of uplink and downlink services 16. QoS, including service flow classification, priority marking, queuing and scheduling, traffic shaping and traffic control |
Optical properties: |
support wavelength division multiplexing technology, single fiber dual wave bidirectional transmission |
interface type: SC / APC | maximum spectral ratio: 1:128 |
rate: uplink 1.25gbps, downlink 2.5Gbps | receiving wavelength: 1490nm |
transmission wavelength: 1310nm | output optical power: - 1 ~ + 4dbm |
receiving sensitivity: < - 27dBm | The longest distance between OLT and ONU is 20km |
power supply: DC 12V 1A 1.5A | Humidity: 10 ~ 90% non condensing |
Operating temperature: 0 ° ~ 40 ℃ | Storage temperature: - 40 ° ~ 70 ° |

