EIMD-20CP Condensate Polishing Module With 16 MΩ*Cm Resistivity And 90-95% Recovery Using Continuous Electrodeionization
The Aquacells EIMD-CP module is engineered to replace mixed bed technology for condensate polishing treatment. Utilizing continuous electrodeionization (EDI) technology, this system produces water with resistivity exceeding 16 MΩ*cm without requiring shutdown and regeneration cycles.
Feed Water Specifications
| Parameter |
Specification |
| Feed Water Source |
Condensate water |
| Temperature |
60-65 ℃ (60-65 ℉) |
| Feed Pressure |
1.4-7 bar (20-100 psi) |
| Fe Content |
<0.01 ppm |
| pH Range |
4-11 |
| Oil Content |
<0.2 ppm |
Typical Module Performance
| Parameter |
Specification |
| Typical Recovery |
90-95% |
| Maximum Feed Pressure |
7 bar (100 psi) |
| Maximum Feed Temperature |
65 ℃ (149 ℉) |
| DC Voltage* |
0-300 V |
| DC Amperage |
0-6 A |
| Product Resistivity |
>16 MΩ·cm |
*Voltage required depends on module size
*The information provided contains general descriptions or performance characteristics that may not always apply as described in actual use cases or may change due to further product development. An obligation to provide the respective characteristics shall only exist if expressly agreed upon in the terms of the contract.