MachineU > China Products > Consumer Electronic > Camera, Photo & Accessories > Telescope & Microscope Accessories
x ray Inspection Equipment with 90 KV x ray Tube and 420*420mm Table
x ray Inspection Equipment with 90 KV x ray Tube and 420*420mm Table
Specifications
Brand Name :
WELLMAN
Model Number :
X-6000
Certification :
CE,ISO9001,FDA
Place of Origin :
China
Payment Terms :
T/T
Delivery Time :
7 work days
Packaging Details :
Wooden case
MOQ :
1
Supply Ability :
Worldwide supply
Description
X-Ray Inspection Equipment 90 KV X-ray Tube and 420×420mm Table
Key Advantages
  • 13×13 cm high-definition large-area digital flat panel detector
  • 420×420mm table with 10KG load capacity
  • Automatic navigation window, table moves to your click location
  • 90kv Hamamatsu tubes with the longest lifespan and maintenance-free
  • Programmable inspection procedures for automated high-volume inspection
  • Easy operation — only 2 hours training required
Working Principle
x ray Inspection Equipment with 90 KV x ray Tube and 420*420mm Table
X-6000 Automatic Inspection Equipment working principle diagram
Hardware Specifications
Category Specifications
X-ray Source Closed microfocus, 90kV max tube voltage, 200μA max tube current, 5μm focal spot, auto preheat
Flat Panel Detector 130mm×130mm effective area, 85μm pixel size, 1536×1536 resolution, 20fps frame rate
Table 420mm×420mm size, 400mm×400mm detectable area, 15kg max load
Equipment 150X geometry magnification, 1500X system magnification, max 3.0s/point inspection speed
Dimensions & Weight 1100mm(L)×1000mm(W)×1600mm(H), 1000kg
Power Supply AC110-220V 50/60HZ, 1300W max power
Configuration Intel I5 CPU, 8G RAM, 240GB SSD, 24" HDMI LCD display
Radiation leakage No leakage, international standard: ≤1μSv/h
Safety Features
Lead glass observation window
Transparent lead glass window shields radiation to observe the inner status.
Window and back door safety interlock
Once users open the window or back door, X-ray tube will power off immediately. When the window or back door is open, users can't turn on the X-ray.
Electromagnetic safety switch
Lock once the X-ray is on, users can't open the observation window.
Emergency stop
Next to the operation position, press to power off
Tube protection
User can't leave the software if you don't close the X-ray tube.
Software Function
Function module Operation
X-ray tube control Using Keyboard and mouse
Status bar Indicates the interlock status, pre-heat status, and X-ray status by flashing alternately red and green
Image effect adjustment The brightness, contrast and gain of the image can be adjusted freely
Product list Users can save the inspection parameters such as Z-axis position, brightness, contrast and gain...
Navigation window The table will move to the place you click and display on the screen.
Motion axis status Display real-time coordinates.
Inspection result The measurement results (voids rate, distance, area, etc., set by users) display in order.
Speed control The movement speed of each axis can be adjusted (slow, normal and fast)
Automatic calculation Click on two points to determine a rectangle.
Parameters adjustment Users can adjust the grayscale threshold, pixel, contrast, size filtering and other parameters.
Add voids manually Users can draw a polygon or a free figure and calculate it as a void into the void rate.
Save parameters Users can save parameters and can directly save the parameters.
Distance Click the A and B points to set as the baseline, then click the C point to measure the vertical distance from the C point to the baseline.
Distance rate It is mostly used to measure the soldering rate of the through-hole.
Angle Click the A and B points to set as the baseline, then click the C point to measure the angle between the BA and BC rays.
Radius Click three points to determine a circle and measure the circumference, area and radius.
Perimeter Click two points to determine a square, measure the length, width and area.
Manual setting Users can set any positions on the table as inspection points, the software will automatically inspect and save the picture.
Array Set two of the inspection points and the number of rows and columns, the software will automatically inspect each point and save pictures.
Automatic identification The software automatically identifies the positions, takes measurements, and saves the image.
Application Examples
x ray Inspection Equipment with 90 KV x ray Tube and 420*420mm Table
BGA Solder Bridge
x ray Inspection Equipment with 90 KV x ray Tube and 420*420mm Table
BGA Solder Voids
x ray Inspection Equipment with 90 KV x ray Tube and 420*420mm Table
PCB Through-Hole
x ray Inspection Equipment with 90 KV x ray Tube and 420*420mm Table
IC Voids and Gold Wire
x ray Inspection Equipment with 90 KV x ray Tube and 420*420mm Table
LED Solder Voids
x ray Inspection Equipment with 90 KV x ray Tube and 420*420mm Table
LED Gold Wire Crack
x ray Inspection Equipment with 90 KV x ray Tube and 420*420mm Table
Capacitor
x ray Inspection Equipment with 90 KV x ray Tube and 420*420mm Table
Inductor
x ray Inspection Equipment with 90 KV x ray Tube and 420*420mm Table
Sensor
x ray Inspection Equipment with 90 KV x ray Tube and 420*420mm Table
Thyristor Surge Suppressors
x ray Inspection Equipment with 90 KV x ray Tube and 420*420mm Table
Fiberglass
x ray Inspection Equipment with 90 KV x ray Tube and 420*420mm Table
Cable
x ray Inspection Equipment with 90 KV x ray Tube and 420*420mm Table
Diode
x ray Inspection Equipment with 90 KV x ray Tube and 420*420mm Table
Steel Pipe Welding Gap
x ray Inspection Equipment with 90 KV x ray Tube and 420*420mm Table
Automobile Electronics
Send your message to this supplier
Send Now

x ray Inspection Equipment with 90 KV x ray Tube and 420*420mm Table

Ask Latest Price
Watch Video
Product Detail
Brand Name :
WELLMAN
Model Number :
X-6000
Certification :
CE,ISO9001,FDA
Place of Origin :
China
Payment Terms :
T/T
Delivery Time :
7 work days
Contact Supplier
video
x ray Inspection Equipment with 90 KV x ray Tube and 420*420mm Table

SHENZHEN WEIMING PHOTOELECTRIC CO.,LTD.

Verified Supplier
1 Years
shenzhen
Since 2018
Business Type :
Manufacturer
Main Products :
X Ray Counter, PCB X Ray Machine, SMD Tower
Certification Level :
Verified Supplier
Discover similar products
View More

Find Similar Products By Category:

Supplier Homepage Products PCB X Ray Machine
MachineU China Products Consumer Electronic Camera, Photo & Accessories Telescope & Microscope Accessories
Contact Supplier
Submit Requirement