MachineU > China Products > Machinery > Electronics Production Machinery
SMT x ray inspection system with 530x530mm inspection stage and 10KG load capacity
SMT x ray inspection system with 530x530mm inspection stage and 10KG load capacity
Specifications
Brand Name :
WELLMAN
Model Number :
X6800
Certification :
CE,ISO9001,FDA
Place of Origin :
China
Payment Terms :
T/T
Delivery Time :
7 work days
Packaging Details :
Wooden case
MOQ :
1
Supply Ability :
Worldwide supply
Description
X-Ray Inspection System with 530x530mm Oversized Stage and 10KG Load Capacity
Key Advantages
  • Speed adjustable 5-axis linkage system
  • New generation 5" HD digital flat panel detector
  • 530×530mm table with 10KG load capacity
  • FPD tilts up to 60° without sacrificing magnification
  • Automatic navigation window
  • Programmable inspection procedures for automated batch inspection
  • Closed type X-ray tube with over 10,000 hours lifetime
Working Principle
SMT x ray inspection system with 530x530mm inspection stage and 10KG load capacity
Hardware Parameters
X-ray Source
TypeClosed, microfocus
Max Tube Voltage90kV
Max Tube Current200μA
Focal Spot Size5μm
FunctionAuto preheat
Flat Panel Detector
Effective Area130mm×130mm
Pixel Size85μm
Resolution1536×1536
Frame Rate20fps
Tiltable Angle60°
Table
Size530mm×530mm
Detectable Area500mm×500mm
Max Load10kg
Equipment Specifications
MagnificationGeometry 200X | System 1500X
Inspection SpeedMax 3.0s/point
Dimensions1360mm (L) × 1365mm (W) × 1730mm (H)
Weight1200kg
Power SupplyAC110-220V 50/60HZ
Max Power1500W
Industrial PCI5 CPU, 8G RAM, 500GB SSD
Displayer24" HDMI LCD
Safety Features
Radiation LeakageNo leakage
Lead Glass Observation WindowTransparent lead glass window shields radiation to observe inner status
Window and Back Door Safety InterlockAutomatic X-ray power off when opened
Electromagnetic Safety SwitchLocks observation window when X-ray is active
Emergency StopLocated near operation position for immediate power cutoff
Tube ProtectionPrevents software exit without proper X-ray tube shutdown
Software Function
Basic Operations
Function ModuleKeyboard and mouse can finish all operations
X-ray Tube ControlUsing mouse to click the X button can turn on or off the X-ray. The real-time tube voltage and current value will display beside, users can click up and down button, or drag the slider, or type to adjust.
Status BarIndicates the interlock status, pre-heat status, and X-ray status by flashing alternately red and green.
Image Effect AdjustmentThe brightness, contrast and gain of the image can be adjusted freely to achieve a satisfactory result.
Product ListUsers can save the inspection parameters such as Z-axis position, brightness, contrast and gain, and can directly call the parameters when inspecting the same product, to improve the inspection efficiency.
Navigation WindowAfter the camera takes a photo of the table, click anywhere in the photo, the table will move to the place you click and display on the screen.
Motion Axis StatusDisplay real-time coordinates.
Inspection ResultThe measurement results (voids rate, distance, area, etc., set by users) display in order.
Speed ControlThe movement speed of each axis can be adjusted to slow, normal and fast.
Voids Rate Measurement
Automatic CalculationClick on two points to determine a rectangle. The software automatically finds and measures the edge of the solder ball in the rectangle, the pad and the internal voids, and can get the data of the voids rate, the area of the solder ball, the circumference, the biggest void's rate, the length and the width, and indicates NG or OK by red and green.
Parameters AdjustmentUsers can adjust the grayscale threshold, pixel, contrast, size filtering and other parameters to get accurate results of automatic calculation.
Add Voids ManuallyUsers can draw a polygon or a free figure and calculate it as a void into the void rate.
Save ParametersUsers can save parameters such as grayscale threshold, pixel, contrast, size filtering and other parameters, and can directly call the parameters when detecting the same product, to improve the detection efficiency.
Other Measurement Functions
DistanceClick the A and B points to set as the baseline, then click the C point to measure the vertical distance from the C point to the baseline.
Distance RateIt is mostly used to measure the soldering rate of the through-hole. Set one more point "D" than the distance. Divide the vertical distance from the D point to baseline by the vertical distance of the C point, to obtain the percentage ratio of the vertical distance of D to C.
AngleClick the A and B points to set as the baseline, then click the C point to measure the angle between the BA and BC rays.
RadiusIt is mostly used to measure round components such as solder balls. Click three points to determine a circle and measure the circumference, area and radius.
PerimeterIt is mostly used to measure square components, click two points to determine a square, measure the length, width and area.
Automatic Inspection
Manual SettingUsers can set any positions on the table as inspection points, the software will automatically inspect and save the picture.
ArrayFor the regular inspection points, users only need to set two of the inspection points and the number of rows and columns, the software will automatically inspect each point and save pictures.
Automatic IdentificationFor inspection points with obvious features, the software automatically identifies the positions, takes measurements, and saves the image.
Application Examples
SMT x ray inspection system with 530x530mm inspection stage and 10KG load capacity
BGA Solder Bridge
SMT x ray inspection system with 530x530mm inspection stage and 10KG load capacity
BGA Solder Voids
SMT x ray inspection system with 530x530mm inspection stage and 10KG load capacity
PCB Through-Hole
SMT x ray inspection system with 530x530mm inspection stage and 10KG load capacity
IC Voids and Gold Wire
SMT x ray inspection system with 530x530mm inspection stage and 10KG load capacity
LED Solder Voids
SMT x ray inspection system with 530x530mm inspection stage and 10KG load capacity
LED Gold Wire Crack
SMT x ray inspection system with 530x530mm inspection stage and 10KG load capacity
Capacitor
SMT x ray inspection system with 530x530mm inspection stage and 10KG load capacity
Inductor
SMT x ray inspection system with 530x530mm inspection stage and 10KG load capacity
Sensor
SMT x ray inspection system with 530x530mm inspection stage and 10KG load capacity
Thyristor Surge Suppressors
SMT x ray inspection system with 530x530mm inspection stage and 10KG load capacity
Fiberglass
SMT x ray inspection system with 530x530mm inspection stage and 10KG load capacity
Cable
SMT x ray inspection system with 530x530mm inspection stage and 10KG load capacity
Diode
SMT x ray inspection system with 530x530mm inspection stage and 10KG load capacity
Steel Pipe Welding Gap
SMT x ray inspection system with 530x530mm inspection stage and 10KG load capacity
Automotive Electronics
Send your message to this supplier
Send Now

SMT x ray inspection system with 530x530mm inspection stage and 10KG load capacity

Ask Latest Price
Watch Video
Product Detail
Brand Name :
WELLMAN
Model Number :
X6800
Certification :
CE,ISO9001,FDA
Place of Origin :
China
Payment Terms :
T/T
Delivery Time :
7 work days
Contact Supplier
video
SMT x ray inspection system with 530x530mm inspection stage and 10KG load capacity

SHENZHEN WEIMING PHOTOELECTRIC CO.,LTD.

Verified Supplier
1 Years
shenzhen
Since 2018
Business Type :
Manufacturer
Main Products :
X Ray Counter, PCB X Ray Machine, SMD Tower
Certification Level :
Verified Supplier
Discover similar products
View More

Find Similar Products By Category:

Supplier Homepage Products PCB X Ray Machine
MachineU China Products Machinery Electronics Production Machinery
Contact Supplier
Submit Requirement