Industrial Microfocus X-Ray Inspection System SMT PCB Inspection 5μm X-Ray Tube
WELLMAN X6800 Industrial Microfocus X-Ray Inspection System SMT PCB Inspection 5 μm Focal Spot 10000-Hour Maintenance-Free X-Ray Tube
Our Advantages
- Closed type X-ray tube with more than 10,000 hours lifetime, maintenance-free
- New generation 5" HD digital flat panel detector (FPD)
- FPD instead of the table can tilt 60°, won't sacrifice magnification
- Automatic navigation window - the table moves to where you click
- 530*530mm table with 10KG load capacity
- Speed adjustable 5 axis linkage system
- Can edit inspection procedures for automated inspection in large quantities
- Easy to operate with only 2 hours training required
Hardware Parameters
| X-ray source |
| Type | Closed, microfocus |
| Max tube voltage | 90kV |
| Max tube current | 200μA |
| Focal spot size | 5μm |
| Function | Auto preheat |
| Flat panel detector |
| Effective area | 130mm*130mm |
| Pixel size | 85μm |
| Resolution | 1536*1536 |
| Frame rate | 20fps |
| Tiltable angle | 60° |
| Table |
| Size | 530mm*530mm |
| Detectable area | 500mm*500mm |
| Max load | 10kg |
| Equipment |
| Magnification | Geometry 200X | System 1500X |
| Inspection speed | Max 3.0s/point |
| Dimensions | 1360mm (L) * 1365mm (W) * 1730mm (H) |
| Weight | 1200kg |
| Power supply | AC110-220V 50/60HZ |
| Max power | 1500W |
| Industrial PC | I5 CPU, 8G RAM, 500GB SSD |
| Displayer | 24" HDMI LCD |
| Safety |
| Radiation leakage | No leakage, international standard: ≤1μSv/h |
| Lead glass observation window | Transparent lead glass window shields radiation to observe the inner status |
| Window and back door safety interlock | X-ray tube powers off immediately when opened; prevents turning on when open |
| Electromagnetic safety switch | Locks when X-ray is on, preventing window opening |
| Emergency stop | Located next to operation position for immediate power off |
| Tube protection | Software prevents leaving without closing X-ray tube |
Software Function
| Function module | Operation |
| X-ray tube control | Mouse-click operation for on/off with real-time voltage/current display and adjustment |
| Status bar | Displays interlock status, pre-heat status, and X-ray status with color indicators |
| Image effect adjustment | Adjustable brightness, contrast and gain for optimal imaging |
| Product list | Save and recall inspection parameters for improved efficiency |
| Navigation window | Click-to-move functionality for precise positioning |
| Motion axis status | Real-time coordinate display |
| Inspection result | Measurement results display with pass/fail indicators |
| Speed control | Adjustable movement speed for each axis |
| Voids rate measurement | Automatic calculation of solder ball parameters with adjustable thresholds |
| Other measurement functions | Includes distance, angle, radius, and perimeter measurements |
| Automatic inspection | Manual setting, array, and automatic identification modes |
Application Examples
BGA Solder Bridge
BGA Solder Voids
PCB Through-Hole
IC Voids and Gold Wire
LED Solder Voids
LED Gold Wire Crack
Capacitor
Inductor
Sensor
Thyristor Surge Suppressors
Fiberglass
Cable
Diode
Steel Pipe Welding Gap
Automobile Electronics