M8 3 Pin Waterproof Connector Male Female Plug Socket Cable Copper Contact Industrial Sensor
Product Overview
The M8 3-pin waterproof male-female connector is a compact industrial circular interconnect system featuring M8×1.0 threaded coupling and IEC 61076-2-104 compliance. This sealed, keyed, vibration-resistant pair delivers dependable 3-wire signal and power transmission for 24 VDC proximity sensors, photoelectric switches, actuator interfaces, and general industrial control cabling, even under moisture, dust, and temperature swings.
Key Benefits
- Ultra-Compact 3-Pin Design: 8mm maximum outer diameter suits miniature sensor and actuator arrays where larger M12 interfaces will not fit
- Reliable Sealing: IP67 protection when mated (IP68 optional) via silicone O-ring, threaded screw lock, and rear grommet for dust, oil mist, and washdown resistance
- Stable 3-Wire Transmission: A-coded 3-pin layout rated 3A / 60V DC for dependable sensor power and signal routing
- Corrosion-Resistant Contacts: Gold-plated phosphor-bronze contacts keep contact resistance at ≤5mΩ and resist oxidation in humid and outdoor environments
- Secure Connection: Keyed A/B coding prevents incorrect mating and guards connected equipment from miswiring
- Flexible Installation: Available in straight and 90° right-angle form factors with field-wireable and overmolded cable options
- Long Service Life: Rated for ≥500 mating cycles with an operating range of -25°C to +80°C to cut long-term maintenance and replacement costs
Technical Specifications
| Parameter | Specification |
| Standard | IEC 61076-2-104 |
| Coupling | M8 × 1.0 threaded (~8 mm nut outer diameter) |
| Gender | Male (pin) ↔ Female (socket) |
| Contact Configuration | 3 pins (A-Code) |
| Rated Voltage | 60 V DC |
| Rated Current | 3 A per contact |
| Contact Material | Phosphor Bronze, Gold Plated |
| Contact Resistance | ≤ 5 mΩ |
| Insulation Resistance | ≥ 100 MΩ @ 500 V DC |
| Dielectric Strength | 1500 V AC / 1 min |
| Protection Level | IP67 when mated (IP68/IP69K optional) |
| Cable Outer Diameter | 3-6 mm |
| Wire Gauge | 0.14-0.34 mm² (26-22 AWG) |
| Operating Temperature | -25 to +80 °C |
| Housing Material | Nickel-Plated Brass, PA66+GF V0 |
| Mating Cycle Life | ≥ 500 cycles |
| Certifications | CE, RoHS, REACH |
Competitive Advantages
vs. M12 connectors: roughly 33% smaller diameter and lower cost, while fully sufficient for 24 VDC 3-wire sensor wiring
vs. JST/PH headers: threaded M8 lock with O-ring delivers IP67 sealing and vibration resistance instead of a bare friction fit
vs. Heat-shrink splices: keyed coding prevents miswiring and supports reusable, serviceable connections rated for 500 cycles
vs. Overmolded-only options: field-wireable design supports custom cable lengths and on-site repair
Application Scenarios
- Factory automation sensor and probe wiring
- Photoelectric and proximity sensor connections
- Robotics and AGV systems
- E-motorcycle and e-bike battery interfaces
- Outdoor and transport equipment
- Packaging and labeling machinery
- Medical and laboratory instruments
- Industrial LED lighting systems