Product Model | WBP-K02M |
Specification and Dimension | 320*260*90 mm |
Net Weight | 4.2KG |
Sheathing Material | galvanized sheet |
Power Dissipation | ≤2 W |
Ambient Humidity | 90% RH (no condensation) |
Working Voltage | AC 110~240V |
Working Temperature | -30℃ ~ +75℃ |
Communication Mode | Ethernet, CAN |
Communication Interface | Ethernet: RJ 45 |
Communication Object | CAN: an indoor node / area controller Ethernet: a system management platform |
Communication Distance | CAN≤1000m |
Table 3.1 Technical Parameters Table of the indoor centralized controller
Centralized Controller For Indoor Parking Lot PGS Core Parking Guidance System Controller RS485 CAN bus.
The indoor centralized controller is the core of the whole system, and is the collection and control center of the whole intelligent parking guidance system. Through the real-time data update of the parking guidance screen, the guidance function of the vehicle is realized. An indoor centralized controller can control up to 25 indoor zone controllers (or node controllers).
1) Using the international advanced 32-bit ARM processor, full industrial grade design, to ensure the stability and reliability of products;
2) The whole system controller can be upgraded remotely, convenient for system maintenance and upgrade, always to meet the needs of users;
3) The equipment has the functions of short circuit, overvoltage and overload protection to prevent the electrical damage to the relevant equipment caused by wiring errors during construction;
4) The overall industrial design, after strict electrostatic, lightning and surge, group pulse and other tests, effectively ensure the reliable use of equipment;
5) The indoor centralized controller can manage up to 256 zones (that is, parking lots can be divided into 256 areas and associated to the guide screen);
6) The partition information is not affected by the physical location of the detector and display installation, and can be associated with any detector and the display;
7) After the associated information is downloaded, the associated information is automatically saved and run correctly independently from the computer.
8) Support for remote upgrade.
Product Installation
Indoor centralized controller is generally installed on the column or wall, the recommended installation height of 2 meters and above. The installation diagram is shown in Figure 4.1: Figure 4.1 Installation diagram of indoor centralized controller
Parking Control K02M Indoor Centralized Controller PGS Core RS485 CAN Bus ultrasonic